first rom drivin me crazy! pls help.

hotwire

Inactive User
Joined
Dec 5, 2004
Messages
351
Reaction score
1
Location
UK Leicester
keep getting this genuises pls help. cant read card or do anything. thanks in advance.

Opening of COM7 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM7 was successful
 
come on guys pls where r all u good helpers gone today im really scratchin my head. thanks for any help.
 
hotwire said:
keep getting this genuises pls help. cant read card or do anything. thanks in advance.

Opening of COM7 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM7 was successful


that card is fooked m8 and it can not be fixed have you got another card you can try
 
i dont think its the card mate as i tried my already modded card which is working fine and it au@s as well and i tried reading n playing with that but same message. cheers for the reply jase02476.
 
hotwire said:
i dont think its the card mate as i tried my already modded card which is working fine and it au@s as well and i tried reading n playing with that but same message. cheers for the reply jase02476.

have you tryed reading card with xncs or rom studio
 
yeh xncs says

No atr sent from card.
Sorry...Not Dumping card

thansk for ur help mate so far.
 
hotwire said:
yeh xncs says

No atr sent from card.
Sorry...Not Dumping card

thansk for ur help mate so far.

have you tryed another com port at the back of the comp
 
sh*t mate sorry but i forgot to mention im using a usb to serial converter and i dont have another port. sorry and thanks again.
 
hotwire said:
sh*t mate sorry but i forgot to mention im using a usb to serial converter and i dont have another port. sorry and thanks again.

is this what you have got that could be your prob have you not got a com port at the back or is something pluged in it
 
i see now you have a laptop what rom card is it and what volt power supply are you useing for the progy
 
im useing a 9v for my prog i only use the 10v for my t911 what programmer have you got m8
 
i have got a infinity usb phoenix and a blue modded t911. using just normal usb connection for usb and 10v power supply for modded t911. cheers for all ur help so far.
 
well i dont know how could i test that in the first place. mind u i just got it yesterday so i dont really know. light comes on and all but who knows? cheers again.
 
hotwire said:
well i dont know how could i test that in the first place. mind u i just got it yesterday so i dont really know. light comes on and all but who knows? cheers again.

if its the blue modded one wich i have the light flash ones when you start a script but then it stays off. here is the stuff you need to get you started with your t911 m8
 
Hi :Jester:
sorry to interupt u guys
But i think your prob is your com port settings
They have to match your using com port 7
Try setting everything to com port 1
And if neccesary use com port 1 with a serial lead
U must also check com port on the progs that are in use
Also check the crystal setting is 3.68 and match
Its all explained here in my tut
http://www.world-of-digital.com/forums/showthread.php?t=59235
Good luck but you shouldnt need it now :Cheers:
 
Back
Top