Fake BK jtaging a 4010 Help please

L33tpL4y4

Inactive User
Joined
Jul 27, 2005
Messages
1,097
Reaction score
1
Hi im doing a friends box using a jtag 10pin, i have beeing reading the tut on the 4000 which is the same.

I have opened BK2.2 and it give me my right ird which is also on the scart and this BK, made up the rst flash and copyed the latest hex for NT* dated 10-11 from the downloads, and still just getting fee to air channels but nothing else.

Been into the engineers menu and card status is just stuck on waiting, which i think might be the BK being incorrect, i have checked everything.

Cant seem to use these bytes in ocd commander
byte 0xf6a8a8 ff

byte 0x009424 8

byte 0x00f6a8a8 8

byte 0x00a0e6dc 8 12ff

byte 20020004 4

byte 0x00a0e6dc 8

Are these just for the sammys?
Please help im on NT*.

Thanks
 
try the sdt

sammy debug tool
 
ok m8 thanks, ill try it now and see what it gives me.
 
AtmelAce said:
BKE should be fine.... double check the BK again.....


It didnt work, just the same BK, i have redone the flash time after time and checked that i wrote bk down ok, also copyed and pasted, what could it be, im using the same hex thats on my sammy so i know its not that. Thanks
 
try puttiing the box into eng menu end connect from there with bke or sdt
BTW has it taken the cr4 update(VOD)?
 
Thanks but its still the same, im just getting the free to air channels, what could it be, IRD is fine but Bk i dont know about BK?
 
TWOBEERCANS said:
try puttiing the box into eng menu end connect from there with bke or sdt
BTW has it taken the cr4 update(VOD)?[/QUOTE


whats the best way to check CR verson m8, cant see it in the engineer M
 
Its ok i got it sorted, was my flash file i named it like new.flash.hex which was causing the error, renamed it to flash.hex, bingo bobs my uncel.
 
Back
Top