error code

[b00b00]

hi i decided to flash my sagem x1 image to commando 7.5.

i use an ethernet cable, i have always flashed the dbox ok up until now.
when i flash in ifa i get an error code which says

error10048
function bind
adress in use

i had commando on my dbox last week but i decided rto flash with a
sportster image.

now i want commando.

ive never had this error message before.
but i think its stopping me from flashing
i have disabled all firewalss pop ups etc

 

[Fergalsworld]

hi i decided to flash my sagem x1 image to commando 7.5.

i use an ethernet cable, i have always flashed the dbox ok up until now.
when i flash in ifa i get an error code which says

error10048
function bind
adress in use

i had commando on my dbox last week but i decided rto flash with a
sportster image.

now i want commando.

ive never had this error message before.
but i think its stopping me from flashing
i have disabled all firewalss pop ups etc

Check the ip of the box is in the same range as your pc networkcard
pc ip 192.168.1.201 and set to10baseT_halfduplex
dbox ip 192.168.1.202 and start network on boot is set to on then press red.

 

[b00b00]

wood i go into network settings to do this.

my dbox ip is 169.254.120.111

 

[Fergalsworld]

wood i go into network settings to do this.

my dbox ip is 169.254.120.111

What is your pc network card static ip it should be one below the boxes ip.

 

[b00b00]

hi in my nestwork settings on the dbox it says
ip 192.268.254.200
subnetmask 255.255.255.0
broadcast192.168.254.255
default gateway 192.168.254.254
dns server 192.168.254.2

its strange i had the klein error last week manage to fix it,
then i have these probs.

i dont have the klein error now though

also thanks for answering my posts i appreciate it

 

[b00b00]

also should i have dhcp turned on or off

 

[Fergalsworld]

Have a read of this it will show you how to set your pc network card up.
http://www.digitalworldz.co.uk/forums/index.php?resources/213/

 

[b00b00]

managed to do it thanks buddy