error 266 nvram ca bad crc

sherry

Inactive User
Joined
Oct 12, 2007
Messages
337
Reaction score
1
Hi guys

i have a pace 4001 and it gets stuck on tune. When i go into engineers and look at the errors i get the following:

error 266 nvram ca bad crc

i have removed the ram and put it back in, removed the red jumper for 5 minutes. when i try to manual update by holding down the down button when powering on it stays on"powering up - just a moment" screen.

any help would be great.

could the ram be knackered?
 

Teeny

Inactive User
Joined
May 12, 2005
Messages
3,544
Reaction score
93
u can't force update a 4001 it does it itself,....is the box for ur area are u in pure area
 

roisin

Inactive User
Joined
Mar 29, 2005
Messages
232
Reaction score
2
Bad crc usually appears after the jumper has been removed and the box has not yet updated itself with new settings. Are you in Pure and is the netid correct for your area?

You will probably need to have a look at TBC's stuck intune guide appendix b. Check the upstream and downstream pages and compare with the guide it will probably determine wether you need to start changing caps to correct the tune problem
 

sherry

Inactive User
Joined
Oct 12, 2007
Messages
337
Reaction score
1
thanks for the replies.

i am in pure ntl
 
TEST
Top