err1

BERTY

Premium Member
Premium Member
Joined
Mar 22, 2005
Messages
257
Likes
0
#1
got box from mate to fix it is a ditv 2000t, it lost its net id and freq, reset it and used it for a day, when i came in it says err1, re booted and took an updadate again as it did the day before when i reset net id, any ideas as to what could be the problem
 
Joined
Mar 21, 2005
Messages
10,438
Likes
13
#2
complete error code list......................

Err1_ CRC fail across Primary Loader image
Err2_ No longer used.
Err3_ Insufficient NVRAM
Err4_ Flash Fail or can't find platform object
Err5_ NVRAM not found

Tuning Sequence Related Errors

Er10_ Unable to Tune to Last frequency
Er11_ Unable to Tune to Home Frequency
Er12_ Unable to Tune to any of the last NIT defined frequencies
Er13_ Unable to scan for a frequency
Er14_ Unable to scan for a symbol rate
Er16_ Unable to tune to hardcoded frequency

Input Stream Errors

Er20_ Timeout on receiving NIT
Er21_ Timeout on receiving PAT
Er22_ Timeout on receiving PMT
Er23_ Timeout on receiving object data
Er24_ Timeout on receiving TDT
Er25_ Sync loss has occurred on the input stream

Object Validation

Er30_ Object CRC Fail
Er31_ Object Digital Signature Fail

Flash programming errors

Er40_ Insufficient Flash ( NAND Flash Specific )
ErrC_ Failed to Erase Flash Sector
ErrD_ Failed to Program a Flash sector.
ErrE_ CRC Failure of image just programmed into Flash
 

michael1

Inactive User
Joined
Jul 28, 2005
Messages
530
Likes
3
#3
just re flow the chips as they are not down right uselly the right one pins 1 to 24

michael 1
 

clive58

Inactive User
Joined
Sep 14, 2004
Messages
4,086
Likes
29
#4
Check the bat' as well mate if its low then that would also cause you to loose the Net id and freq'.
It should be about 3.3V, if its less than 3volts then replace it.
Clive.
 
TEST
Top