yes i menage to connect this for jtag pinout only not have broadband studio3 for this and drivers for win7,yes is vu solo pro v2 but images goes of magicbox inside
Edit cyusbfx1_fx2lp.inf in the folderCY3684_EZ-USB_FX2LP_DVK\1.0\Drivers\cyusbfx1_fx2lp\wlh-win7\x64
under [Device] and [Device.NTamd64] add%VID_6672&PID_2920.DeviceDesc%=CyUsb, USB\VID_6672&PID_2920
also update the related string section at the bottom:VID_6672&PID_2920.DeviceDesc="UChicago USB Device"(put whatever text you like here between the quotes)
Update driver in Device Manger, browsing the aforementioned folder. The USB device will be recognized.
Configure the eeprom on the board to get the cypress IC to run in the desired mode: