DM500s image for N/A
- Thread starter Tophat
- Start date
What function are you wanting from plugins ?
Looking for softcam emu. Found Infos in tuxbox config folder. uploaded oscam to /var/bin/emu folder and watching tv.
Info from a long time back. No my info
1. Fire up the DCC software if you have closed it. ReConnect the software to Dreambox. Goto FTP.
Locate the rqcamd-1.19-PLi-PPC.tar.gz file in the computer side in FTP client. Transfer the tar
file into /tmp folder of the dreambox.
2. Once you have transferred the file, Press Blue button on the remote.
a. Select Software Management
b. Goto Manual Install
i. Select rqcamd-1.19-PLi-PPC.tar.gz and press OK. It will install RQCAMD on the
dreambox as well as intergrate it with Pli image so you don?t have to manually
do it. Once finished installing, Press Red Button to close. Exit all the way
ii. Pretty much all the files come with proper permissions, but if you like to make
sure all the files have right permission then follow these steps exactly:
1. Goto Telnet in the DCC.
2. Type each line and press Enter.
chmod 755 /var/bin/rqcamd
chmod 644 /var/keys/rqcamd.conf
chmod 644 /var/keys/Autoupdate.Key
chmod 644 /var/scce/EEP01_102.bin
chmod 644 /var/scce/EEP08_102.bin
chmod 644 /var/scce/ROM102.bin
3. Now find the folder where you extracted the rqcamd-1.19-PLi-PPC.tar.gz and goto the keys
folder. Use text editor to edit rqcamd.conf file. You would need to update the following fields
per your setup:
a. webif=1 <- Change this to 0. I have found this sometimes has issues so I disable it as I
don?t need to use rqcamd via browser anyway.
b. caid_priorities=1801|1816 <- If you using N3 card, change this to 1816|1801
c. decoder_type=0 <- Change this to 1 to use the card server instead of internal softcam.
d.
e.
card_server_url_0= <- Put the proper url of the RQCS with username and des key.
newcamd://dummy:[email protected]:10000/0102030405060708091011121314Note: RQCS could internal running on the Dreambox or External somewhere else.
f.
process_emm_s=0 <-Change this to 1 to pass the EMM S to RQCS.
process_emm_u=0 <-Change this to 1 to pass the EMM S to RQCS.
h.
If you are using the internal softcam for N2, then you can configure the ?SoftCam Server
Setting?. Besure to change the decoder_type to 0 to use internal softcam.
i.
Save the rqcamd.conf file.
Create an emtpy file called Keylist.txt and save it in same place as rqcamd.conf(Rqcamd
supposedly creates it by it self but I do it anyway)
4. Now on DCC, locate the rqcamd.conf and Keylist.txt in the Computer Side and transfer both files
to /var/keys folder. Overwrite the files if DCC prompts you for it.
5. Press blue button and goto SoftCam Setup
a. Select Rqcamd-1.19 in the Default SoftCam dropdown menu.
b. Press Blue Button to Save.
c. Exit all the way and Reboot the box.
6. Once the box reboots, you will see an Extenal Message saying rqcamd-1.19 has started. The
message will dissappear in few seconds and by this time you should picture if everything went
correctly.
I hope this helps
1. Fire up the DCC software if you have closed it. ReConnect the software to Dreambox. Goto FTP.
Locate the rqcamd-1.19-PLi-PPC.tar.gz file in the computer side in FTP client. Transfer the tar
file into /tmp folder of the dreambox.
2. Once you have transferred the file, Press Blue button on the remote.
a. Select Software Management
b. Goto Manual Install
i. Select rqcamd-1.19-PLi-PPC.tar.gz and press OK. It will install RQCAMD on the
dreambox as well as intergrate it with Pli image so you don?t have to manually
do it. Once finished installing, Press Red Button to close. Exit all the way
ii. Pretty much all the files come with proper permissions, but if you like to make
sure all the files have right permission then follow these steps exactly:
1. Goto Telnet in the DCC.
2. Type each line and press Enter.
chmod 755 /var/bin/rqcamd
chmod 644 /var/keys/rqcamd.conf
chmod 644 /var/keys/Autoupdate.Key
chmod 644 /var/scce/EEP01_102.bin
chmod 644 /var/scce/EEP08_102.bin
chmod 644 /var/scce/ROM102.bin
3. Now find the folder where you extracted the rqcamd-1.19-PLi-PPC.tar.gz and goto the keys
folder. Use text editor to edit rqcamd.conf file. You would need to update the following fields
per your setup:
a. webif=1 <- Change this to 0. I have found this sometimes has issues so I disable it as I
don?t need to use rqcamd via browser anyway.
b. caid_priorities=1801|1816 <- If you using N3 card, change this to 1816|1801
c. decoder_type=0 <- Change this to 1 to use the card server instead of internal softcam.
d.
e.
card_server_url_0= <- Put the proper url of the RQCS with username and des key.
newcamd://dummy:[email protected]:10000/0102030405060708091011121314Note: RQCS could internal running on the Dreambox or External somewhere else.
f.
process_emm_s=0 <-Change this to 1 to pass the EMM S to RQCS.
process_emm_u=0 <-Change this to 1 to pass the EMM S to RQCS.
h.
If you are using the internal softcam for N2, then you can configure the ?SoftCam Server
Setting?. Besure to change the decoder_type to 0 to use internal softcam.
i.
Save the rqcamd.conf file.
Create an emtpy file called Keylist.txt and save it in same place as rqcamd.conf(Rqcamd
supposedly creates it by it self but I do it anyway)
4. Now on DCC, locate the rqcamd.conf and Keylist.txt in the Computer Side and transfer both files
to /var/keys folder. Overwrite the files if DCC prompts you for it.
5. Press blue button and goto SoftCam Setup
a. Select Rqcamd-1.19 in the Default SoftCam dropdown menu.
b. Press Blue Button to Save.
c. Exit all the way and Reboot the box.
6. Once the box reboots, you will see an Extenal Message saying rqcamd-1.19 has started. The
message will dissappear in few seconds and by this time you should picture if everything went
correctly.
I hope this helps
renwich
Inactive User
- Joined
- Oct 3, 2005
- Messages
- 740
- Reaction score
- 61
RQCamd is not supported... main Commando DM500 dev passed away
- Joined
- Jan 31, 2006
- Messages
- 4,401
- Reaction score
- 3,717
