Di 2000 BK

[j-lee]

Ok whats the score on getting bk wiyh libby i've got a box thats been of stream for a while i was going to volt it till i looked inside and found no simm.
So how can i tell if libby will work????

Also does anyone know if the volt method can be applied to the 2000 the setup looks the same apart from the simm chips are now on the board.
Can i not use the empty sockets next to the attys to force the address on then read the data off the other side.( I'm guessing attys are data bus one side and address bus other side )
The empty sockets are parallel'd to the attys.
Any data sheets would be greatly appriciated for the chips on the simm and the attys.
I dont suppose anybody has schematics for stb or is that wish full thinking.....

Any comments welcome preferably helpfull ones though......:Cheers:

: shocked2

Edit:
Does any one know if the bk is at the same address as 1000????

 

[JIMMYQ]

schematics

http://www.world-of-digital.com/forums/showthread.php?t=63221

bk = read the attys mate

 

[j-lee]

Thanks JimmyQ dont suppose you got 1000 or 1000 ph1b

I did a search for this and came up blank

 

[JIMMYQ]

wil post them in the morning feel knacked now off to bed

 

[j-lee]

@JQ :Cheers:

Edit:

Any chance of those 1000 1b schematics

 

[j-lee]

If anyone reading has schematics for 1000 1b could you post them for me.

Also need to know if address for bk is same in 1000 and 2000

 

[mentholflash01]

address line

hi mate
the 1 on the left is the 2000 and the 1 on the right is 1000
regards

 

[j-lee]

ird

Thanks m8 do you also know the ird address i forgot about that.

:Cheers:

 

[mentholflash01]

ird should be on the scart can inside the box mate

 

[j-lee]

I like to find the ird to confirm i'm doing it right b4 i get the bk

 

[benny59]

Ok whats the score on getting bk wiyh libby i've got a box thats been of stream for a while i was going to volt it till i looked inside and found no simm.
So how can i tell if libby will work????
Also does anyone know if the volt method can be applied to the 2000 the setup looks the same apart from the simm chips are now on the board.
Can i not use the empty sockets next to the attys to force the address on then read the data off the other side.( I'm guessing attys are data bus one side and address bus other side )
The empty sockets are parallel'd to the attys.
Any data sheets would be greatly appriciated for the chips on the simm and the attys.
I dont suppose anybody has schematics for stb or is that wish full thinking.....
Any comments welcome preferably helpfull ones though......:Cheers:
: shocked2
Edit:
Does any one know if the bk is at the same address as 1000????

it looks simple enough if your decent with an iron m8

 

[TBC]

welldone benny59 - i'm gonna try that on a 2000 looks relatively easy.

 

[pil196]

n1 thats got to be worth a go