debug sammy 2100

[fkekobad]

hi any one help me i try to sammy 2100 sand to debug but it want go please guide how to debug. i try to get box key out
please please
fkekobad

 

[JT86]

hi any one help me i try to sammy 2100 sand to debug but it want go please guide how to debug. i try to get box key out
please please
fkekobad

To put box into debug mode:

After applying power to the box you hold the down channel button until ld14 shows on display. Let go, it should go up to ld40 then go blank. Leave it for about 30 seconds then the 0 should come up.

 

[fkekobad]

To put box into debug mode:

After applying power to the box you hold the down channel button until ld14 shows on display. Let go, it should go up to ld40 then go blank. Leave it for about 30 seconds then the 0 should come up.

what is debuge mate i think sand box in eng. mode. am i right
fkekobad

 

[afcwomble]

Debug Mode is when you want to use Jtag mate. If you want to access Engineers Menu hold in up and down buttons together whilst powering up box til you see LD14 on display-then let go and it should go to E/M

 

[wilko]

power up box ait till ld 20 appears hold bottom button in until ld40 shows let go and wait till zro appears! then jtag