• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

debug sammy 2100

fkekobad

Inactive User
Joined
Sep 18, 2004
Messages
479
Likes
2
#1
hi any one help me i try to sammy 2100 sand to debug but it want go please guide how to debug. i try to get box key out
please please
fkekobad
 

JT86

Inactive User
Joined
Nov 30, 2006
Messages
534
Likes
4
#2
hi any one help me i try to sammy 2100 sand to debug but it want go please guide how to debug. i try to get box key out
please please
fkekobad
To put box into debug mode:

After applying power to the box you hold the down channel button until ld14 shows on display. Let go, it should go up to ld40 then go blank. Leave it for about 30 seconds then the 0 should come up.
 

fkekobad

Inactive User
Joined
Sep 18, 2004
Messages
479
Likes
2
#3
To put box into debug mode:

After applying power to the box you hold the down channel button until ld14 shows on display. Let go, it should go up to ld40 then go blank. Leave it for about 30 seconds then the 0 should come up.
what is debuge mate i think sand box in eng. mode. am i right
fkekobad
 

afcwomble

New Member
Joined
Oct 8, 2005
Messages
0
Likes
6
#4
Debug Mode is when you want to use Jtag mate. If you want to access Engineers Menu hold in up and down buttons together whilst powering up box til you see LD14 on display-then let go and it should go to E/M
 

wilko

Member +
Joined
May 4, 2005
Messages
288
Likes
0
#5
power up box ait till ld 20 appears hold bottom button in until ld40 shows let go and wait till zro appears! then jtag