I have same problem I get Team Commando Loading Kernel then nothing. How do you load flash without IP address??????? All info I have found on flashing ie Flash Assistant ask for the box's IP address.
I have Nokia Dbox2 2x chips.
Please help!
Ulesim, thanks for your reply, tried flashing with FTP, but get an error message on my PC which is in German! So will not allow the FTP to continue and flash.
I have connected using crossover cable and using the dbox2-flashimageassitent software. I have put in the Sporster 1.73 as the image in the first box. Dell wirelss 1350 WLAN mini-PCI Card-Packet Scheduler Miniport in the second box. Connected a nullmodem cable (No).
Hit start then ok to confirm, then I get the error message.
On the DBOX when I first power up I get a serires of numbers on the LCD, then Team Commando loading Kernel then streams of number/letters scroll up the LCD screen, after a few seconds this stops and the box goes into standby.
Could you give me a break down of what to do quite new a this.
Please advise, many thanks.
Ulesim, thanks for your advise m8 will try this tonight and update tomorrow.
Is this common fault when flashing the DBOX?
Is my box dead?
Which image is best to use for the Nokia Dbox2 2x?
Thanks again for your help so far.
Knowledge flows from the one who knows!
In some pc configurations only flashing with nullmodem cable and crossover is working.
It makes no sense to try to save 0.99 for a nullmodem cable if flashing problems appear.
HAS ANYONE A STEP BY STEP GUIDE .WIN ERROR 5 CANNOT OPEN COM PORT
IM NOT SO GOOD AT THE DBOX FLASHING GAME ???
To fix any corrupt image or Kein System, use IFA. Do not worry about the null modem cable as the crossover cable works just fine but doesn't give you all the flashing info. I only use the null cable when putting dboxes into debug mode.
Make sure all firewalls and antiviruses are off and disable all network cards except for the one you are going to connect to the dbox. assign a static ip address to the network card too otherwise windows dhcp will be trying to assign and ip address. plug everything together but do not power the dbox on, work through the ifa software and then plug in the dbox to the mains. Lade Software and Hallenberg.com should appear and then the flash will occur.
If the dbox does not boot successfully after the happy faces appear on the LCD then the image used is corrupt so just re-flash in the same manner. this should take not more than 5 minutes! be careful when making a 1x image into a 2x image, or vice versa, using the image clone software as this does not always work.
if you need working images pm me.
good luck
Hello, everyone back again. Sorry to say no joy last night was still getting error message after clicking okay to "Ready to Flash" prompt using IFA.
Question using IFA box 1 asks for file for image I've Put in Sportster 1.7.
Box 2 asks for Network Card that Dbox is connected to.
I have choice of three on my laptop which should I use:
Dell Wireless 1350 mini-PCI card -Packet scheduler miniport
Broadcom 570x Gigabit Intergrated Controller-Packet scheduler miniport
Nortel IPECSHM adapter-Packet scheduler miniport
Maybe this is where I'm going wrong( I selected the top one of the three ell Wireless 1350 mini-PCI card -Packet scheduler miniport)
Cheers
Sorry for my ignorance, but how do I PM you for the image?
HAS ANYONE A STEP BY STEP GUIDE .WIN ERROR 5 CANNOT OPEN COM PORT
IM NOT SO GOOD AT THE DBOX FLASHING GAME ???
AND THE FLASH XP CANT FIND the ip address NOT CAN AS ABOVE .
We use essential cookies to make this site work, and optional cookies to enhance your experience.