DBOX2 IFA PROBLEm

singhl

Inactive User
Joined
Jul 27, 2005
Messages
56
Reaction score
0
I was upgrading my nokia box2 by ftp'ing the image to /tmp and ugrading via the remote conrtrol - unfortunately it locked up and did not flash.

I have tried usinf IFA but it locks up on 14% of the backup - anyone got any ideas or is this box dead, I thinkl the flash was erased, so there would not be anything to back up?
 

JIMMYQ

DW Regular
Joined
Nov 26, 2004
Messages
7,177
Reaction score
27
Location
DW
does the box work at all? if the image has been erased then what are you backing up
 

singhl

Inactive User
Joined
Jul 27, 2005
Messages
56
Reaction score
0
The box powers up - but no picture, the box screen shows Bmon V1.0 etc...
and Lade.

I am using IFA to get a working image ono the box - as I expained when ftp'ing to /tmp and using remote to reflash - it failed.

So I do not think there is a valid image on the box.

IFA fails whilst trying to do a backup - I don't want a backup but IFA insists on doing one.

Any ideas?
 
S

Speedy2206

Guest
Have you tried using a different version of IFA? Theres version 1.56 and version 2.0.....
 

singhl

Inactive User
Joined
Jul 27, 2005
Messages
56
Reaction score
0
This is what is coming out of IFA
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Ýdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 168.100.100.201, My IP 168.100.100.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 168.100.100.201; our IP address is 168.100.100.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 168.100.100.201; our IP address is 168.100.100.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 168.100.100.201; our IP address is 168.100.100.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 168.100.100.201; our IP address is 168.100.100.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0

Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit

Size: 8192 kB in 71 Sectors

Using SCC ETHERNET device
TFTP from server 168.100.100.201; our IP address is 168.100.100.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


















dbox2 - ImageFlashingAssistent

- Hallenberg.com -

Wilkommen auf ihrer dbox2


Starte Backup....
nfs: server 168.100.100.201 not responding, still trying

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139/810X Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (0)
IP-Adresse des Netzwerkadapters: 168.100.100.201
IP-Adresse die die dbox bekommt: 168.100.100.202
Comport: Communications Port (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) XP 2100+ @ 1750 MHz
Dateiname des Images: Cryo_sportster17_2x_uk04.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------


It stick at

Starte Backup....
nfs: server 168.100.100.201 not responding, still trying

The dbox shows a progess bar and "Backup..." with dbox2-IFA as the title

Boot manager has the following

BootP> Request from 00:50:9C:17:8A:1B (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 168.100.100.202 with MAC 00:50:9C:17:8A:1B
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\dboxifa_tmp\tftpboot\u-boot"...
TFTP> Transfer finished, sent 275 blocks
BootP> Created dynamic ARP entry for DBoxIP 168.100.100.202 with MAC 00:50:9C:17:8A:1B
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\dboxifa_tmp\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Created dynamic ARP entry for DBoxIP 168.100.100.202 with MAC 00:50:9C:17:8A:1B
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\dboxifa_tmp\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 352 blocks
TFTP> Non-BootP TFTP-transfer requested "kernel-yadd"
TFTP> Started TFTP-Transfer for "C:\dboxifa_tmp\tftpboot\kernel-yadd"...
TFTP> Transfer finished, sent 1492 blocks
1 - mountd: mount: path: C/dboxifa_tmp/yaddroot/
 
S

Speedy2206

Guest
Use [DLMURL="http://www.dboxservice-hallenberg.de/freedownload.php?downloadid=3"]THIS[/DLMURL] version of IFA - I dont think it goes through the backup process with this version.

Liam.
 
Last edited by a moderator:

JIMMYQ

DW Regular
Joined
Nov 26, 2004
Messages
7,177
Reaction score
27
Location
DW
liam just sent you a pm mate? or any chance you can come on msn pls?
 

singhl

Inactive User
Joined
Jul 27, 2005
Messages
56
Reaction score
0
cheers the english version of IFA did indeed fix the problem - thanks liam
 
TEST
Top