View attachment 92823
Try this one buddy.
IFA version 2.2
Turn off windows firewall
Disable wireless network connection
set LAN network IP to 192.168.0.201
( IFA automatically sets dbox IP to 192.168.0.202 )
open IFA
select image for flashing
select network device
switch dbox on
press start
a dialogue box pops up
switch dbox off
click ok
switch box on
flashing should begin
progress is indicated on LCD ( IFA image on TV screen )
Fertig and smiley faces on LCD means success
disconnect network
off then on at the mains
well rod me old son i tried it your way and ..........
same!!!lol
I was using ifa v3
doing it your way its just the same as the way i was doing it
comes up on lcd screen whats happening on tv Hallenberg
its when it comes to end you switch off ifa restart box lcd says lade and then just stops tv goes blank and you cant get into box
so this time its away
bring on the new year lol
just a thought maybe if you open the box up, and dust of the dust on the circuit board
might help
Ah that's a real pity mate !!
I've got to salute your perseverance though !! Admirable !
Found another old guide !
Try this in the new year
IFA version 2.2
Turn off windows firewall
Disable wireless network connection
Rename image file mtd3.img
set Local Area Connection network IP to 192.168.0.201
( IFA automatically sets dbox IP to 192.168.0.202 )
configure Local Area Connection link speed / duplex mode to 10Mbps / half duplex
open IFA
select image for flashing ( mtd3.img from C:\ )
select network device ( there should only be one available )
switch dbox on
press start
a dialogue box pops up
switch dbox off
click ok
switch box on
flashing should begin
progress is indicated on LCD ( IFA image on TV screen )
Fertig and smiley faces on LCD means success
disconnect network
off then on at the mains
I'm now Duncan Bannatyne mate ..... I'm owt !
Good luck
I'm away for a joe Pasquale !!! Lol
Good luck
I'm away for a joe Pasquale !!! Lol
if this disny work im oot for a don revie !!! lol
och ma birdie .....its a gladys knight or a tom tit lolYou 2 dinnae half talk a load of Tom Kite......................:Laugh:
tried both of them both2x images got kein systemI was messing around and noticed that I couldn’t get into the commando 12 images using newtuxflash tool which leads me to believe that they are not JFFS2 in which case Image Convertor will not work.
So, what I’m saying is if the original commando 12 2x image was LZMA then you try to convert it using Image Convertor you will get an invalid image !!
This might explain the kein system / lade after an IFA session !!??
If you're still up for it, try this Ultraphat backup by jamesyboyjim which is JFFS2.
Does the d-boxes still work??? lol Its been that long since I touched 1. I chucked around 5 of them in the skip around 6 months back as the wife was saying they've been there for years lol
You need to install cccam and put you line into the cccam.cfg file restart and you should be good to go.Right chaps im back. got ultraphat image onto box getting FTA but rest of channels just black screen not even no channel on it this is the closest i've been can someone help me out and put the final touch to it cheers
We use essential cookies to make this site work, and optional cookies to enhance your experience.