dbox wont get past lade

might work

hi i disabled anti virus load ifa set earhnet and null click okay load dbox and in the con window i get this
ÿdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.23, My IP 192.168.1.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0

Bank # 1: INTEL 28F640J3A (64M), 16 bit

Size: 8192 kB in 64 Sectors

Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Looking up port of RPC 100005/1 on 192.168.1.23

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: 3Com 3C920B-EMB Integrated Fast Ethernet Controller - Packet Scheduler Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.1.23
IP-Adresse die die dbox bekommt: 192.168.1.202
Comport: Communications Port (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) XP 2500+ @ 1833 MHz
Dateiname des Images: Cryo_sportster17_1x_uk04.img
Imagetyp: Ein Flash
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------
 
it works

it now works it has flashed it was the stupid norton anti virus using a null cable is it faster doing that then just using the earthnet because it used to take 15 mins this 1 toke 5 mins any way thanks for your help now i just need to get a image that is good for front row epg and good for recording any idea thank for all those that helped me thanks....
 
Glad you got it working,
as i said earlier norton antivirus is a bitch, people have no end of trouble with this enabled sometimes it best to unistall it a never use it again
i have no trouble with McAfee i just have to disable it when i want to flash my box.
I use this never have any trouble with it give it a go.
1x
http://world-of-digital.com/forums/showthread.php?t=51281
Hope this helps.
 
Back
Top