Can't Flash An Image!!!

[a_sagad]

Hi,

I have tried to flash my Nokia DBox2 x2 with an ethernet cable and a null modem cable, but it doesn't detect the network, the box doesn't even boot up, it gets stuck before it loads the kernal.

I have also tried the null modem option to flash it and it didn't do it.

So can anyone please help???

Appreciated

 

[Devilfish]

If the box isn't booting up, i.e. stuck at 'loading kernel' or 'kein system', then there's only 2 ways you can flash it.

IFA (Image Flash Assistant)
Hyperterminal method and null modem cable

If I read your post right, I think you've tried both of these methods and failed.

There's a few guides in the download section for flashing using the hyperterminal method, have you checked them out?

 

[a_sagad]

Hi,

thanks for the reply, but i've tried both ways.

The ethernet way can't detect the box.

The null modem takes too long and it didn't even finish properly.

So i don't know what to do???!!!!

 

[Fergalsworld]

Use both cables and Post what you get in the IFA com window when you try to flash it.

 

[Devilfish]

The hyperterminal method is long but usually works if the correct commands are entered.

Maybe have a look at the guides in the download section, there are a few for this method. They might be written differently but do the same thing, if you know what I mean.

What have you got to loose? It's a door-stop as it is.