i just set up a 1000t box. I cut the talk back and set my frequency and network id.
The box works fine, accept few channels are missing. well quite a few...
i get the a black screen and the message
"Attention - This channel is temporarily unvailable. Please wait a moment and or try again later"
and if i leave it on the channel long enough i get error 1015.
I programmed an au card with Toxic7aTW. i got bk and ird which i found via engineers menu and in the database.
I can not get channels...
101, 102, 106, 107, 110, 111, 112, 120, 123, 124, 125, 126, 127, 132, 133, 135, 138, 139, 140, 142, 145, 147, 152, 190, 203, 204, 206, 225, 226, 230, 231, 233, 234, 240, 260, 265, 266, 267, 281, 286, 301, 302, 303, 305, 307, 309, 310, 311, 312, 315, 320, 325, 326, 327, 328, 330, 332, 400, 401, 402, 411, 419 490, 491, 495, 497, 511, 512, 513, 514, 515, 521, 530, 534, 537, 539, 540, 602, 609, 610, 612, 613, 617, 620, 704, 705, 707, 712, 713, 717, 724, 725, 726, 727, 730, 732, 740, 741, 742, 745, 746, 750, 809, 815, 816, 818.
I have programmed au cards before so i know how to programme a card...
i used toxic7_ExtEEgen to make my external eeprom file and used Toxic7aTW as my flash (dated 19 April 2005)
The box works fine, accept few channels are missing. well quite a few...
i get the a black screen and the message
"Attention - This channel is temporarily unvailable. Please wait a moment and or try again later"
and if i leave it on the channel long enough i get error 1015.
I programmed an au card with Toxic7aTW. i got bk and ird which i found via engineers menu and in the database.
I can not get channels...
101, 102, 106, 107, 110, 111, 112, 120, 123, 124, 125, 126, 127, 132, 133, 135, 138, 139, 140, 142, 145, 147, 152, 190, 203, 204, 206, 225, 226, 230, 231, 233, 234, 240, 260, 265, 266, 267, 281, 286, 301, 302, 303, 305, 307, 309, 310, 311, 312, 315, 320, 325, 326, 327, 328, 330, 332, 400, 401, 402, 411, 419 490, 491, 495, 497, 511, 512, 513, 514, 515, 521, 530, 534, 537, 539, 540, 602, 609, 610, 612, 613, 617, 620, 704, 705, 707, 712, 713, 717, 724, 725, 726, 727, 730, 732, 740, 741, 742, 745, 746, 750, 809, 815, 816, 818.
I have programmed au cards before so i know how to programme a card...
i used toxic7_ExtEEgen to make my external eeprom file and used Toxic7aTW as my flash (dated 19 April 2005)