Valentino000
Inactive User
- Joined
- Nov 4, 2005
- Messages
- 43
- Reaction score
- 0
hi all
ok i know this has been covered before, and yes i have read all the threads about this problem but it still wont work.
i have a sammy witha locked n*l card, so i got a jtagger tried a few methods but after much reading the following method is supposed to be the one that works -
* i connect my jtagger to my pc and to the stb
* i hold the down button on the stb and switch it on
* when display reaches ld:14 u let go
* wait until display shows 0 and green light is on the power button
* start up bke 2.2 and click the jtag tab
* choose config 1 and sammy 2100 (davic) click connect
* ird shows 3e ** ** 7e so that works
* but bk is 00 00 00 00 00 00 etc
before i did anything i have cut talkback and cleared board with the wire connected to the battery method, i then connected it to the stream and it did update, waited until channels came up on tv, all fta channels work, then tried the above jtag and the damn thing won't give me the bk!!!!!
also tried ocd, same thing, give me ird but nothing for bk, i am using the following byte in config 1 file for bke 2.2 -
[NTL]
IRD =0x20020004
BOXKEY =0x00F6A8A8
so does any 1 hav any ideas coz im lost and about to cry
ok i know this has been covered before, and yes i have read all the threads about this problem but it still wont work.
i have a sammy witha locked n*l card, so i got a jtagger tried a few methods but after much reading the following method is supposed to be the one that works -
* i connect my jtagger to my pc and to the stb
* i hold the down button on the stb and switch it on
* when display reaches ld:14 u let go
* wait until display shows 0 and green light is on the power button
* start up bke 2.2 and click the jtag tab
* choose config 1 and sammy 2100 (davic) click connect
* ird shows 3e ** ** 7e so that works
* but bk is 00 00 00 00 00 00 etc
before i did anything i have cut talkback and cleared board with the wire connected to the battery method, i then connected it to the stream and it did update, waited until channels came up on tv, all fta channels work, then tried the above jtag and the damn thing won't give me the bk!!!!!
also tried ocd, same thing, give me ird but nothing for bk, i am using the following byte in config 1 file for bke 2.2 -
[NTL]
IRD =0x20020004
BOXKEY =0x00F6A8A8
so does any 1 hav any ideas coz im lost and about to cry