BOD card and unlocking

[cracker666]

is this normal its a BOD card:
I thought I should be getting ++-++--++---+--++++--+--+--++---++-+-++--++++--+-+-+----+++-+-+-+-++---+-.
??



xecuting Script: C:\Documents and Settings\AL Tech\Desktop\rom11 unlocker\rom11 unlocker.xvb
________________Setting up WinExplorer_________________
TX Data : 19 03 15 60 10 21 00 0D A0 CA 00 00 07 21 05 06
03 FF FF 00 20 40 0E 05 9F 00
RX Data : 19 20
RX Data : 12 60 20 A1 1E 09 00 00 1B 13 53 6D FF FF FF FF
FF FF FF FF FF FF 00 FF FF 00 00 FF FF 00 00 00
Trying to Unlock the Rom 11.....
INITIAL PARAMETERS

Glitch Delay = 16F9
VCC = 30
Glitch Type = 08

+93+8C++40+93+8C--+1B++93++8C+0A+8C+8C+8C+8C+8C+++8C+8C-+8C+0A+93+++8C+8C-++93+1B++8C-++21++8C+8C+8C+8C++8C+40+8C+8C+8C+0A+46+8C+8C+++8C+93+93+46+93+8C+8C+8C++-+1B+8C+8C+8C+40+8C+8C+8C+8C+8C+21-+93-+93+8C+8C+8C+1B+8C+8C+8C+8C-+8C+8C+8C+46+1B+46+8C+8C+8C+8C+8C+8C+21+46-+8C+8C+8C+B1+8C+8C+8C-+93-+8C+21+8C-+93+8C-+8C+8C+21+0A+21+40-+93+8C+46-+8C--+8C+8C+46+B1+8C+40+46+8C+46+93+8C+B1+40+1B+93+0A+93+21+8C+8C+21+8C+46-+8C+21-+93-+93+1B+8C+0A-+B1+21+46-+93-+8C+46+40+93+93-+8C+93+40+B1+8C+46-+93+93-+8C+8C+8C+8C-+8C+40+8C+8C+8C+93+21-+93+8C+8C+02+8C+93-+8C+93+8C+8C+0A+1B+8C+93+93-+8C+1B+8C+40+46+8C+8C+8C+8C+40+8C+21+93+8C-+8C+02+8C+93+8C+8C+21-+21+1B+8C+0A+21+8C+8C+8C+8C+8C+8C+8C+93+B1+0A+8C+8C+0A+93+8C+8C+8C+40+93+8C+21+8C+B1+46+B1-+8C+46+46+8C-+93+B1+93+93+8C+93+0A+8C+8C--+93+40+B1+8C+46+8C+8C+46+40+8C+8C+8C+8C--+8C+93+8C+40+B1+8C+8C+8C+1B+8C-+8C-+8C+8C+93+0A+8C+8C-+8C-+1B+46+8C+46+0A+93+8C+B1-+8C-+8C+8C+1B+8C+8C+8C+B1+8C+40+93-+21-+93+8C+93+46+8C-+8C+93+8C+93+8C+8C+93+8C-+8C-+8C+8C+8C+93+8C+8C+8C+40+8C+93+8C-+93+46+8C+8C+46-+93+46+8C+40+8C+8C-+1B+0A+8C+8C+8C+93+8C+0A+93+46-+8C+8C+8C-+21+8C+40+93+8C+8C-+21+46+21+B1+B1+8C+40+40+93+8C+8C+93-+93+8C+8C+8C-+8C+8C+B1+46+8C+40+1B+93-+08+93+8C
TRYING NEW DELAY....
Glitch Delay = 16FA
VCC = 5F
Glitch Type = 4

+8C-+8C+0A+21+8C+46+8C-+8C+93+46-+8C-+8C+40+21+8C+21+21-+93+8C+93+40+B1+8C+8C+0A+21+8C-+1B+1B+93+46+46+8C+8C+40-+8C+8C+8C+46+8C+46+8C-+8C+8C+8C-+8C+8C+8C+8C+8C-+1B+21+8C+8C+8C+8C+8C+93+8C+8C+8C+8C+8C+0A+8C-+1B+8C+40+8C+B1+8C+8C+93+1B+8C+8C+93+40+93+8C+8C+8C+8C+0A+0A+8C+8C+93-+1B+93-+8C+46+02+8C+93+0A+46+8C-+93-+08+40+46+0A+8C-+1B+93+0A+46+8C+8C+8C+B1+46+46+1B+93+93+46+46+B1+46+46+8C+40+8C+8C+8C-+93+B1+93+93+8C+8C+8C+8C+21+8C+02+8C+8C+93+8C+93+40--+8C+8C+02+93+93+8C+B1+8C+40+B1+8C--+8C+21+B1+8C--+93+1B+8C+46+8C-+8C+8C+93+B1+8C+1B+40+8C+8C+93+46+8C+8C+8C+8C+02+8C+02+93+93+8C+8C+40+8C+8C+8C+46-+8C+46---+1B+8C+8C+21+8C+21+93+21+93+8C+8C+93+93+0A-+1B+21+8C+8C+8C+93+8C+8C+46-+93+40+40+B1+0A+B1+1B+8C+8C+8C-+1B+8C+0A+46+93+21+40+46+93+8C+93+8C+93+8C+8C+8C+8C--+B1+93+46+8C+8C+93+46+8C+93+46+8C+0A+8C+8C+0A+8C+8C+1B+8C+93+8C+93+B1+1B+21+8C+8C+46+8C+8C+8C+8C-+8C+B1+93+93+8C+46+8C+93--+46+1B+8C+8C+40+46+0A+8C+1B+93+8C--+8C+8C+8C+8C+40+8C-+93+1B+8C+21+93+8C+40+93+8C+8C+1B+B1+93+1B+0A+8C+8C+1B+93+02+8C+02+40+46+40+21+8C+93+93+8C+93-+93+8C+8C+0A+8C+21+93+46+0A+8C-+93+8C+8C+8C-+B1+93+93+1B+8C+93-+1B-+93-+8C+8C+8C+8C+8C+46+8C+8C+8C-+8C+8C+21+40+93+40+40+1B+8C+8C+46+8C-+93+93+8C+8C+8C+8C+93+8C+1B-+1B+46+8C+21+02+46-+8C+93+8C+B1+93-+8C+8C+21+8C+8C
TRYING NEW DELAY....
Glitch Delay = 16FA
VCC = 91
Glitch Type = 5

+1B+8C+93+8C+8C+8C+46+8C+21+8C+02+8C+93+46---+1B+93+21+8C+8C+93+8C+40+93+8C+93+93+8C+8C-+93+93+21+1B+8C+93+8C+21+46+21+1B+93+8C+02+8C+93+93+8C-+8C+40+8C+8C+93+40+8C-+1B-+8C+8C+8C+93+8C+8C+8C+8C+B1+8C+8C+8C+8C+46+8C+0A+40-+21+8C+8C+1B+8C+8C+1B-+8C+8C+21+1B+21+93+8C+8C+8C+93+8C+8C+93+8C+8C+8C+0A+8C+93+8C+93+46+8C+8C+8C+93+93+21+8C+93+8C+8C+93+1B+8C-+00+93+8C+B1+93+93+8C+B1+21+1B+8C+8C+21+8C+8C+93+8C-+8C+93+8C+93+8C+0A+8C-+8C+8C+93+8C+46+40+8C-+93+8C+8C+B1+8C+8C+8C+8C+93+46+8C+93+8C+46+8C+8C+8C+46+8C-+93+8C+8C+46+1B+8C+46+8C+8C+21+8C-+8C+8C+1B+93-+8C+8C+0A+8C+8C+8C+8C+8C+93+93+8C+8C+8C+93+93+8C+8C+8C+46+93+8C+8C+8C-+00+8C+8C+46+8C+1B+8C+8C+8C+8C+8C+93+8C+02+8C+8C+8C+8C+46+46+02-+00+21+0A+8C+8C+8C--+8C+8C+8C+93+8C+8C+46+46+93+8C+8C+8C-+8C+93+8C+1B+8C+8C+8C+40-+8C+8C+93+8C+8C+8C+B1+0A+93+8C+8C+8C+93+8C+8C+8C+8C+8C-+8C+8C+46+8C+40+8C+8C+B1+8C+8C+40+02+93-+93+8C+B1+1B+93+8C+8C-+1B+21+93+8C+8C+8C+8C+8C+8C+8C+8C+8C+8C+93-+8C+40-+8C+8C+02+40+8C+8C+8C+8C+21+93+02+93-+1B+8C+8C+46+0A+8C+8C+93+93+40+8C+46+93+93-+93+8C+8C+

 

[fes_786]

fookin hell lookks like ur pot is adjusted super high!!

what u using a t911 ior nexus or ubomb??

 

[cracker666]

Thats if I set it to Glitch Delay = 16F9 VCC = 30 Glitch Type = 08
But If I leave it alone its normal ------+++---++-+----++++.

Its a Kyro Tucker (Ubomb is a clone of it) penga modded and 2k2 resistor.

How can I see If its too high, I have loads of 5k trimmers Which I could use.

I have a modded t911 as well I could try

 

[tmc]

Do you have a trimmer on it if not replace your 2.2k res with the trimmer and adjust. Thats if your 2.2k res controls the vcc.

tmc

 

[cracker666]

dont know but it soldered between the card slot and gnd.
I have sone 5k trimmerswhich I could easy install and try.
How do I know if I have adjusted the trimmer correcly.
or is it to set to 2.2k via DVM
like in the picture

 

[fes_786]

u would be best using the blue t911

much easier to use and adjust

well thats what i use

 

[cracker666]

difference between blue and normal is the 4619 chips.
aint it.

 

[tmc]

yes thats where the trimmer will go 1 leg to gnd the othe 2 must be linked it connects to the card reader and also the 4053 chips. Ajust the pot slowly until you get the vcc around 20-30 mark.

tmc

 

[cracker666]

Ajust the pot slowly until you get the vcc around 20-30 mark.

Is there a test script which could be used to adjust the pot, or is it any script .

Because I have noticed that the scripts adjust the VCC automatically.

 

[tmc]

Adjust the pot

tmc

 

[cracker666]

ok installed trimmer and trying to adjust it,
Whats the reference point?.
What am I looking for?.

 

[tmc]

adjust it slowly so the vcc is around 20 to 30.

tmc

 

[cracker666]

ok the vcc to 25 ohms and tries the script
Glitch Delay = 00E9
VCC = 30
Glitch Type = 0A

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-++++++++++++++++++++++-+++-++++++++-++--++-+++--+-++-++++++++++++++++-+-+-+-++-++----++-+-++-+-++++-+-++++++-++-+--++-++++++-+++++-+-+-+++++++++-----+++++++++-+-+++-+-++--++--++

 

[tmc]

are you using the bod script as +++----++++ looks right. You may still need to adjust the pot slightly.

tmc

 

[cracker666]

The confusion has been many tutorials say to use a 5k trimmer set to 2.2k.
and now setting it to between 20-30 ohms for now.
its a learning curve.
Cheers for all your help.