• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

BOD card and unlocking

cracker666

Inactive User
Joined
May 9, 2006
Messages
615
Likes
5
#1
is this normal its a BOD card:
I thought I should be getting ++-++--++---+--++++--+--+--++---++-+-++--++++--+-+-+----+++-+-+-+-++---+-.
??



xecuting Script: C:\Documents and Settings\AL Tech\Desktop\rom11 unlocker\rom11 unlocker.xvb
________________Setting up WinExplorer_________________
TX Data : 19 03 15 60 10 21 00 0D A0 CA 00 00 07 21 05 06
03 FF FF 00 20 40 0E 05 9F 00
RX Data : 19 20
RX Data : 12 60 20 A1 1E 09 00 00 1B 13 53 6D FF FF FF FF
FF FF FF FF FF FF 00 FF FF 00 00 FF FF 00 00 00
Trying to Unlock the Rom 11.....
INITIAL PARAMETERS

Glitch Delay = 16F9
VCC = 30
Glitch Type = 08

+93+8C++40+93+8C--+1B++93++8C+0A+8C+8C+8C+8C+8C+++8C+8C-+8C+0A+93+++8C+8C-++93+1B++8C-++21++8C+8C+8C+8C++8C+40+8C+8C+8C+0A+46+8C+8C+++8C+93+93+46+93+8C+8C+8C++-+1B+8C+8C+8C+40+8C+8C+8C+8C+8C+21-+93-+93+8C+8C+8C+1B+8C+8C+8C+8C-+8C+8C+8C+46+1B+46+8C+8C+8C+8C+8C+8C+21+46-+8C+8C+8C+B1+8C+8C+8C-+93-+8C+21+8C-+93+8C-+8C+8C+21+0A+21+40-+93+8C+46-+8C--+8C+8C+46+B1+8C+40+46+8C+46+93+8C+B1+40+1B+93+0A+93+21+8C+8C+21+8C+46-+8C+21-+93-+93+1B+8C+0A-+B1+21+46-+93-+8C+46+40+93+93-+8C+93+40+B1+8C+46-+93+93-+8C+8C+8C+8C-+8C+40+8C+8C+8C+93+21-+93+8C+8C+02+8C+93-+8C+93+8C+8C+0A+1B+8C+93+93-+8C+1B+8C+40+46+8C+8C+8C+8C+40+8C+21+93+8C-+8C+02+8C+93+8C+8C+21-+21+1B+8C+0A+21+8C+8C+8C+8C+8C+8C+8C+93+B1+0A+8C+8C+0A+93+8C+8C+8C+40+93+8C+21+8C+B1+46+B1-+8C+46+46+8C-+93+B1+93+93+8C+93+0A+8C+8C--+93+40+B1+8C+46+8C+8C+46+40+8C+8C+8C+8C--+8C+93+8C+40+B1+8C+8C+8C+1B+8C-+8C-+8C+8C+93+0A+8C+8C-+8C-+1B+46+8C+46+0A+93+8C+B1-+8C-+8C+8C+1B+8C+8C+8C+B1+8C+40+93-+21-+93+8C+93+46+8C-+8C+93+8C+93+8C+8C+93+8C-+8C-+8C+8C+8C+93+8C+8C+8C+40+8C+93+8C-+93+46+8C+8C+46-+93+46+8C+40+8C+8C-+1B+0A+8C+8C+8C+93+8C+0A+93+46-+8C+8C+8C-+21+8C+40+93+8C+8C-+21+46+21+B1+B1+8C+40+40+93+8C+8C+93-+93+8C+8C+8C-+8C+8C+B1+46+8C+40+1B+93-+08+93+8C
TRYING NEW DELAY....
Glitch Delay = 16FA
VCC = 5F
Glitch Type = 4

+8C-+8C+0A+21+8C+46+8C-+8C+93+46-+8C-+8C+40+21+8C+21+21-+93+8C+93+40+B1+8C+8C+0A+21+8C-+1B+1B+93+46+46+8C+8C+40-+8C+8C+8C+46+8C+46+8C-+8C+8C+8C-+8C+8C+8C+8C+8C-+1B+21+8C+8C+8C+8C+8C+93+8C+8C+8C+8C+8C+0A+8C-+1B+8C+40+8C+B1+8C+8C+93+1B+8C+8C+93+40+93+8C+8C+8C+8C+0A+0A+8C+8C+93-+1B+93-+8C+46+02+8C+93+0A+46+8C-+93-+08+40+46+0A+8C-+1B+93+0A+46+8C+8C+8C+B1+46+46+1B+93+93+46+46+B1+46+46+8C+40+8C+8C+8C-+93+B1+93+93+8C+8C+8C+8C+21+8C+02+8C+8C+93+8C+93+40--+8C+8C+02+93+93+8C+B1+8C+40+B1+8C--+8C+21+B1+8C--+93+1B+8C+46+8C-+8C+8C+93+B1+8C+1B+40+8C+8C+93+46+8C+8C+8C+8C+02+8C+02+93+93+8C+8C+40+8C+8C+8C+46-+8C+46---+1B+8C+8C+21+8C+21+93+21+93+8C+8C+93+93+0A-+1B+21+8C+8C+8C+93+8C+8C+46-+93+40+40+B1+0A+B1+1B+8C+8C+8C-+1B+8C+0A+46+93+21+40+46+93+8C+93+8C+93+8C+8C+8C+8C--+B1+93+46+8C+8C+93+46+8C+93+46+8C+0A+8C+8C+0A+8C+8C+1B+8C+93+8C+93+B1+1B+21+8C+8C+46+8C+8C+8C+8C-+8C+B1+93+93+8C+46+8C+93--+46+1B+8C+8C+40+46+0A+8C+1B+93+8C--+8C+8C+8C+8C+40+8C-+93+1B+8C+21+93+8C+40+93+8C+8C+1B+B1+93+1B+0A+8C+8C+1B+93+02+8C+02+40+46+40+21+8C+93+93+8C+93-+93+8C+8C+0A+8C+21+93+46+0A+8C-+93+8C+8C+8C-+B1+93+93+1B+8C+93-+1B-+93-+8C+8C+8C+8C+8C+46+8C+8C+8C-+8C+8C+21+40+93+40+40+1B+8C+8C+46+8C-+93+93+8C+8C+8C+8C+93+8C+1B-+1B+46+8C+21+02+46-+8C+93+8C+B1+93-+8C+8C+21+8C+8C
TRYING NEW DELAY....
Glitch Delay = 16FA
VCC = 91
Glitch Type = 5

+1B+8C+93+8C+8C+8C+46+8C+21+8C+02+8C+93+46---+1B+93+21+8C+8C+93+8C+40+93+8C+93+93+8C+8C-+93+93+21+1B+8C+93+8C+21+46+21+1B+93+8C+02+8C+93+93+8C-+8C+40+8C+8C+93+40+8C-+1B-+8C+8C+8C+93+8C+8C+8C+8C+B1+8C+8C+8C+8C+46+8C+0A+40-+21+8C+8C+1B+8C+8C+1B-+8C+8C+21+1B+21+93+8C+8C+8C+93+8C+8C+93+8C+8C+8C+0A+8C+93+8C+93+46+8C+8C+8C+93+93+21+8C+93+8C+8C+93+1B+8C-+00+93+8C+B1+93+93+8C+B1+21+1B+8C+8C+21+8C+8C+93+8C-+8C+93+8C+93+8C+0A+8C-+8C+8C+93+8C+46+40+8C-+93+8C+8C+B1+8C+8C+8C+8C+93+46+8C+93+8C+46+8C+8C+8C+46+8C-+93+8C+8C+46+1B+8C+46+8C+8C+21+8C-+8C+8C+1B+93-+8C+8C+0A+8C+8C+8C+8C+8C+93+93+8C+8C+8C+93+93+8C+8C+8C+46+93+8C+8C+8C-+00+8C+8C+46+8C+1B+8C+8C+8C+8C+8C+93+8C+02+8C+8C+8C+8C+46+46+02-+00+21+0A+8C+8C+8C--+8C+8C+8C+93+8C+8C+46+46+93+8C+8C+8C-+8C+93+8C+1B+8C+8C+8C+40-+8C+8C+93+8C+8C+8C+B1+0A+93+8C+8C+8C+93+8C+8C+8C+8C+8C-+8C+8C+46+8C+40+8C+8C+B1+8C+8C+40+02+93-+93+8C+B1+1B+93+8C+8C-+1B+21+93+8C+8C+8C+8C+8C+8C+8C+8C+8C+8C+93-+8C+40-+8C+8C+02+40+8C+8C+8C+8C+21+93+02+93-+1B+8C+8C+46+0A+8C+8C+93+93+40+8C+46+93+93-+93+8C+8C+
 

fes_786

VIP Member
VIP Member
Joined
Nov 30, 2005
Messages
3,894
Likes
61
#2
fookin hell lookks like ur pot is adjusted super high!!

what u using a t911 ior nexus or ubomb??
 

cracker666

Inactive User
Joined
May 9, 2006
Messages
615
Likes
5
#3
Thats if I set it to Glitch Delay = 16F9 VCC = 30 Glitch Type = 08
But If I leave it alone its normal ------+++---++-+----++++.

Its a Kyro Tucker (Ubomb is a clone of it) penga modded and 2k2 resistor.

How can I see If its too high, I have loads of 5k trimmers Which I could use.

I have a modded t911 as well I could try
 
T

tmc

Guest
#4
Do you have a trimmer on it if not replace your 2.2k res with the trimmer and adjust. Thats if your 2.2k res controls the vcc.

tmc
 

cracker666

Inactive User
Joined
May 9, 2006
Messages
615
Likes
5
#5
dont know but it soldered between the card slot and gnd.
I have sone 5k trimmerswhich I could easy install and try.
How do I know if I have adjusted the trimmer correcly.
or is it to set to 2.2k via DVM
like in the picture
 

fes_786

VIP Member
VIP Member
Joined
Nov 30, 2005
Messages
3,894
Likes
61
#6
u would be best using the blue t911

much easier to use and adjust

well thats what i use
 
T

tmc

Guest
#8
yes thats where the trimmer will go 1 leg to gnd the othe 2 must be linked it connects to the card reader and also the 4053 chips. Ajust the pot slowly until you get the vcc around 20-30 mark.

tmc
 

cracker666

Inactive User
Joined
May 9, 2006
Messages
615
Likes
5
#9
Ajust the pot slowly until you get the vcc around 20-30 mark.

Is there a test script which could be used to adjust the pot, or is it any script .

Because I have noticed that the scripts adjust the VCC automatically.
 

cracker666

Inactive User
Joined
May 9, 2006
Messages
615
Likes
5
#13
ok the vcc to 25 ohms and tries the script
Glitch Delay = 00E9
VCC = 30
Glitch Type = 0A

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-++++++++++++++++++++++-+++-++++++++-++--++-+++--+-++-++++++++++++++++-+-+-+-++-++----++-+-++-+-++++-+-++++++-++-+--++-++++++-+++++-+-+-+++++++++-----+++++++++-+-+++-+-++--++--++
 
T

tmc

Guest
#14
are you using the bod script as +++----++++ looks right. You may still need to adjust the pot slightly.

tmc
 

cracker666

Inactive User
Joined
May 9, 2006
Messages
615
Likes
5
#15
The confusion has been many tutorials say to use a 5k trimmer set to 2.2k.
and now setting it to between 20-30 ohms for now.
its a learning curve.
Cheers for all your help.