Battery Removal

Teeny

Inactive User
Joined
May 12, 2005
Messages
3,544
Reaction score
93
Guy's, how do I remove a battery from a 1000b, it needs replacing, do I just flip it out (so to speak)
:banana: :banana: :banana:
 

davidh

<font color="RED">Administrator</font>
VIP Member
Joined
Aug 9, 2001
Messages
14,953
Reaction score
121
Location
LIVERPOOL
yes but u will need to reset the netid and frequency and pin
 

Teeny

Inactive User
Joined
May 12, 2005
Messages
3,544
Reaction score
93
davidh said:
yes but u will need to reset the netid and frequency and pin


Well I tried and tried to flip it out, eventually got it out, along with the battery contact that broke off the board, spent almost an hour soldering the flippin thing back on, eventually got it done with slight modification to it, luckily got it up and running.

After further enquiring about this, I've been told this has to de soldered to remove battery.
 

crackerchalk

Inactive User
Joined
Aug 16, 2005
Messages
1,931
Reaction score
42
Location
Berks Pure NTHell
Hi
Is this box the same 1 having the sound probs
Also why are u trying to remove the battery
It appears its similar to a 4001 about 25 mm long
 

Teeny

Inactive User
Joined
May 12, 2005
Messages
3,544
Reaction score
93
crackerchalk said:
Hi
Is this box the same 1 having the sound probs
Also why are u trying to remove the battery
It appears its similar to a 4001 about 25 mm long

(1) no mate, it's a different box.
(2) The batt was as good as dead. 1.4v couldn't find anywhere to plug the charger in, so thought best change it instead.......lol
(3) Yeah, their both fat and round, see the attachment below!!!!!!!!!
 
Last edited:

JIMMYQ

DW Regular
Joined
Nov 26, 2004
Messages
7,177
Reaction score
27
Location
DW
so you yanked the flipping battery out tina............LOL PMSL
 

khan

Member ++
Joined
Mar 19, 2005
Messages
460
Reaction score
7
hi mate
the bugger to desolder, just cut it just above the pcb and solder the new batt from top
 

Teeny

Inactive User
Joined
May 12, 2005
Messages
3,544
Reaction score
93
JIMMYQ said:
so you yanked the flipping battery out tina............LOL PMSL

LOL.... yep along with the contact on the board.... I didn't know if it was just in there tight or not , that's why I posted a thread asking before i did anything....... it's a shame you didn't reply to my post 3 days ago........lol.:banana: :banana: :banana:
 
TEST
Top