Backdoor Retieval Blocked

[ray123]

HELLO all,
i succesfully unlock rom 11 , but mistackenly enter the ird , now i have try rom tudio ,xncs1 , but no way out , i also use nagra edit 4.1 this is all am .gettgs.unfortunately i do not hava a safe copy of the image , but i have the box key and ird, i return it back into my glitcher but it tells me maybe i have a virgin card as my ird is set as 0000000 ,.
any sugesstion would be appriciated


Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 31 49
ROM Revision: 011
EEPROM Revision: RevB01
ProviderID: xx
CamID: xx xx xx
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Attempting to login to BD0
Unable to login, bad password detected
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

 

[spud1966]

What image did you use to write to the rom11

 

[pmoore31]

Mi m8 Carwash (again many thanks to him) supplied me with this backdoor password

F9 A4 E4 D8 DD E7 22 1B D7 97 FD 56 A8 72 09 B5

Give it a go it has worked on a few of my cards

 

[ray123]

I use a non locking image, but at the moment am able to read it rom studio, but i could not locate the bin file on my desctop can you enlighten me how to change it to .bin. file, so that rom studio would locate it , thanks

 

[ray123]

thanks pmoore31 it does nt work for me

 

[DeAdlyD]

hiya guz
im having the same problem with a Rom10 A82 provider 4001 tried the password still no joy ''blackdoor retieval has been blocked'' now i can read the card in XNCS1.8 and Mrom give me the OK status no problem, if its is possible can you use a working AuR0m10 on this card and if so what software would i use please :banana:

thanks again DW

 

[carwash]

I use a non locking image, but at the moment am able to read it rom studio, but i could not locate the bin file on my desctop can you enlighten me how to change it to .bin. file, so that rom studio would locate it , thanks

The easiest way to transfer file type from nagraedit to romstudio:
Use XNCS1.8
Open image with XNCS and save it”!

Then you can read with romstudio

 

[crackerchalk]

The easiest way to transfer file type from nagraedit to romstudio:
Use XNCS1.8
Open image with XNCS and save it”!

Then you can read with romstudio

Not sure if that works
So try this
Open my computer click tools folder options
Then click the view tab
Now untick hide known extension for file types
Now close and click the bn10 or bn11 file
as if u were changing the name
Now u will see the full name which u change to .bin
Dont forget to retick after your done cos it can cause probs

 

[DeAdlyD]

sorted:
what i did was like you said carwash,
opened the card with XNCS1.8 then saved has BIN file
opened the Bin file in Nagra4.1 read the backboor key0 etc,
then i loaded up Au rom10 using nagra write back to the Au Rom10 with the backdoor keys and card works fine now,

thanks again DW:banana: :banana:

 

[carwash]

Not sure if that works
So try this
Open my computer click tools folder options
Then click the view tab
Now untick hide known extension for file types
Now close and click the bn10 or bn11 file
as if u were changing the name
Now u will see the full name which u change to .bin
Dont forget to retick after your done cos it can cause probs

Why go through all that on your pc when you could do this:

Open image in nagraedit and save as a .bin (Example: carwash rom10.bin)
It gives you a choice of filetypes to save as.
Select all files(*.*) from the filetype menu and
rename the file to .bin.(see examle)
filetype first. I save as .bin all the time with nagraedit, that gives me a choice of programes to use without fidling about in my PC.
try"!!!!!