Attention: smart card has been removed...

dee19867

Inactive User
Joined
Dec 2, 2004
Messages
127
Reaction score
0
Hi there,

im using a funcard in my 1000 box but i keep getting the attention smart card has been removed blaa blaa blaa everytime i switch over channel... is there any way round this???

i used rst to create my flash and used the rst telewest keys from download section.
 

edcase

Inactive User
Joined
May 2, 2005
Messages
1,161
Reaction score
18
I have had this problem with an atmega in the past, I think your image must not have a camID in it. If you remove the card then replace it the message will dissapear and not show again till you reboot the box..
But if you reprog the card and make sure it has a camID it should sort it.

edcase
 

nickgen

Inactive User
Joined
Mar 17, 2005
Messages
237
Reaction score
1
ive got the same problem with an atmega ive put the keys in manually but ive left the cam as 00000 because i dont know what to put their any ideas what to put for a cam id
 

edcase

Inactive User
Joined
May 2, 2005
Messages
1,161
Reaction score
18
@nickgen - make one up mate
 
TEST
Top