2100c getting box key

adam01

Inactive User
Joined
Nov 1, 2004
Messages
264
Reaction score
1
Hi all

I am trying to get my box key but just returns 0000000000

I have tried ocd but all I get is not connected
tried sdt thats gives me my ird but box key all 00000
tried bke same problem

the other thin I noticed is I shorted out the bat pluged it all in
changed feq and pin but net id didnot update
unplugged it plugged it back in didnt do update
then gave message

chanels unavalible this may be due to cable been unplgged

All cables are plugged in
I think its to do with netid not setting itself but cannot cange cos carnt get ocd to work

PLEASE HELP
 
hi
make sur all your connections are ok.
if alls o.k
hold "down" until ld20 then let go .
after that wail until the display shows 0
then try using your software.................also are you using mac mot??
 
Hi all

I am trying to get my box key but just returns 0000000000

I have tried ocd but all I get is not connected
tried sdt thats gives me my ird but box key all 00000
tried bke same problem

the other thin I noticed is I shorted out the bat pluged it all in
changed feq and pin but net id didnot update
unplugged it plugged it back in didnt do update
then gave message

chanels unavalible this may be due to cable been unplgged

All cables are plugged in
I think its to do with netid not setting itself but cannot cange cos carnt get ocd to work

PLEASE HELP

HiYa,

You Will need the correct Bytes M8?

Have a read at these two Threads http://www.digitalworldz.co.uk/forums/showthread.php?t=116249

http://www.digitalworldz.co.uk/forums/showthread.php?t=79511&highlight=3_3L_P2N_N-S2100

Good Luck
 
Thanks for the quick response

what is mac mot as this may be what I am missing
 
I have found it in download section

Will try that when I get home from work
 
Are you ex C&W. I find BKE2.2 dead easy to use. Same as you I got all zeros at first but by editing Config 1 and changing the CW Boxkey to BOXKEY =0x00974c70, the correct BK was returned.
 
Thanks again for your replys

I installed Mac mot still no joy

so desolded the jtag clean the points put it back on opened ocd

connected first time

got keys with 0x009b5290 8 fro virsion excw 3_3B

Changed ird to correct one as when did bat trick it set it to 09999

also programmed an AU Funcard and that worked first time


Hope this can help soemone else with the same problem
 
Back
Top