2000 box stuck on pace

[bro]

alright guys,got a 2000 box about three weeks ago with original card,unlocked the card and got the bk and ird,,programmed the card and put it in the box,,everthing went ok then i went on holiday for two weeks and swithed it back on and all i get is,pace on the display and nothing else,,,,,,,

any ideas

thanx in advance

 

[sticky]

pull red jumper a reset the box try that http://www.world-of-digital.com/forums/search.php?searchid=11566

 

[bro]

pull red jumper a reset the box try that http://www.world-of-digital.com/forums/search.php?searchid=11566

tryed that,still the same,also tryed the 4321 trick,no joy

 

[spud1966]

Sounds like you might have a dry joint, reflow the atmels on the box.

Cheers Garry

 

[JIMMYQ]

Sounds like you might have a dry joint, reflow the atmels on the box.

Cheers Garry

id say the same

 

[bro]

would i have to do that even do i never touched the atmels..got bk and ird of card

 

[mentholflash01]

hi mate
it could be a dry joint like a very small crack in the solder it needs resoldering quickest easiest and with best results hot air rework station
but if you use a good flux and a fine soldering iron its also posible but remember not to keep the iron on the pads too long
regards

 

[bro]

cheers,but i think its may be beyond me

 

[mentholflash01]

youll neva know till ya try an its the ony way to learn mate
not that hard just a little fidly