tm 2t oe

cat010

Inactive User
Joined
Jan 13, 2010
Messages
165
Reaction score
23
Location
somewhere
taken the plunge and bought one of these box's,do you download the image put it on a usb stick insert it into box and power off /power on to install new image?
do you need to install the bootloader separate or is it included in the image?
i will probably install the vix image by digidude.
 
Last edited:
This is taken from another site by Sicilian, I have modified it slighty by grouping the PC stuff together.

Guide how to USB flash / upgrade a Technomate TM-2T.

1) Download your preferred image.
2) Format a USB stick FAT32 on your PC, leave the stick connected to your PC.
3) Extract the rar or zip file and copy the complete update folder to the root of your USB stick.
4) Now check the file stucture on your USB stick. You should have update > tm2toe > cfe > image flash files inside this folder.
5) Remove USB stick from PC.
6) Power off your receiver.
7) Insert USB stick into receiver.
8) Power on the receiver, when you receiver the message on your TV screen press OK on the front panel.
9) Wait for the flashing process to complete, do not power off until the complete message is on your TV screen.
10) Once complete, remove the USB stick and power back on.

The current set of boot loaders does both the 4D and Vix images, there is no need to install it.
 
tried this guide above it just boots into the image on the box any ideas
 
I have the twin-oe and its works exactly as abu has posted, make sure that you do not have the file zipped/rar on the stick, I think the folder is update. You could put it into the usb in the front whilst its still on, turn off at back and turn on. A message should appear that new software has been found and press ok to continue. A the end of the flash it should say either finished and to turn off or it will be reboot. Not sure on last bit its been a few weeks since I updated mine.
 
no there was no prompts nothing, after putting usb stick in power off/on it just boots into the image on the box
 
Then there is a problem with the USB stick or file layout.

It should be "update/tmtwinoe/cfe/....."

How many USB drives have you got plugged in.
 
i downloaded from here and it has update/tmtwinoe/cfe/,,thats the only usb connected
 
I am really sorry, I made a mistake.

For the Twin it is as above.
For the 2T, it is "update/tm2toe/cfe/....."
Please ensure that you have the right image.
 
Which image did you want again? The Vix image for the 2T is on version 521 from the openvix download site.
 
Do most people prefer the vix or 4d image?
It does not matter what most people prefer. It is what you prefer that is most important.

There are also images from the OPenAAF team, Sif team. Try them and see which you/others in the house like.

Almost all plugins should work whichever image you use.
 
It does not matter what most people prefer. It is what you prefer that is most important.

There are also images from the OPenAAF team, Sif team. Try them and see which you/others in the house like.

Almost all plugins should work whichever image you use.

Thanks ill take a look at a few.
 
Back
Top