Help Inputting CC lines into TM-800HD

fitz11

Inactive User
Joined
Jul 16, 2011
Messages
12
Reaction score
0
Hello People

I recently purchased a TECHNOMATE TM-800HD ENIGMA 2 LINUX, I've managed to update the Image on the
box, and I've seen the easy way to upload CC: lines is by using the Web Interface which opens when ip
address of TM-800 is searched for in the URL:problem I have encountered is the Web interface which has a
different looking front end, does not seem to allow you to input any CC: lines. Can anyone help me
to solve this problem? or show me another way to input the CC: lines:

Thanks for the Help
Fitz11
 
turn the power off at the back of the receiver, and turn back on, watch the BOOT counter, and after its hit 100% itll say CHECKING KEY (it only says this for 3 seconds). During this time, press the OK button on the front of the receiver, and an IP address will show in the window. Type this IP into a web browser and youll see the receivers miniweb screen, scroll down the page and the emulator editing options will be there

moved to correct section
 
Thanks digidude

That sounds like the way I've approached this except when scroll down the miniweb screen their was no emulator editing option, but i will try this again.

Thanks
 
Thanks digidude

That sounds like the way I've approached this except when scrolling down the miniweb screen their was no emulator editing option, but i will try this again.

Thanks.
 
the TM800 has 3 different web interfaces

MINIROOT, accessed by repeatedly pressing the power button when receiver starts to boot

MINIWEB, accessed by pressing the OK button during the 3 second window when 'CHECKING KEY' is displayed during booting

Web interface, accessed after the receiver has booted completley

all 3 have different options for different things m8
 
Hi Digidude

Makes no difference, I'm always able to access the Web Interface, what i cannot do is update it with info I want to add such as update the cc: line ? No emulator editing option, tried Full Factory Reset and even changing Tuner Settings, image being loaded on Start-up is a PLi-E2 iQ.

The iQ WebControl can change channels, give you info on channels, use remote control from Web Interface, but no editing abililty? Can anyone help?
 
have you FTP'd to a box before ?

download Filezilla (free) ftp client
 
Hi Digidude

Makes no difference, I'm always able to access the Web Interface, what i cannot do is update it with info I want to add such as update the cc: line ? No emulator editing option, tried Full Factory Reset and even changing Tuner Settings, image being loaded on Start-up is a PLi-E2 iQ.

The iQ WebControl can change channels, give you info on channels, use remote control from Web Interface, but no editing abililty? Can anyone help?

youre on the web interface m8, the box fully booted before you entered the IP address
 
as Digi says mate
box will boot to 100% then say "Checking Keys" at this point press OK on the front of receiver and it will show the IP

leave box and goto PC and enter this IP into the URL bar:)

tut here in the stickies of this room https://www.digitalworldz.co.uk/index.php?threads/244787/
 
Last edited by a moderator:
Back
Top