new patches for 6000+7100+5402 super series 1/06/2012

thijss26

Inactive User
Joined
Oct 2, 2010
Messages
843
Reaction score
670
Location
Eire
the new patches are there Download center
as the note says "problems with 30w-9-19-13-23- east satellites fixed"
so let's see if it works ?
 
Hi thijss26,

Already tried...

Phantompatch-TM5402HDCI_ALL_121p_01-06-2012.stb (6.3MB)
Technomate Original Software-TM5402HDCI__120.zip (5.7MB)

:grayno:

Best Wishes,
Zorch
 
Last edited:
just tried on my TM 6902 and yes c.nl is open for the first time on the "02"models thanks for that Phantom loving it
seem to have lost the capability to use the upgrade menu in the ip settings menu with p.patch 120 and p.patch 121 hopefully this will be fix in the next patches
don't see any other changes
 
Hi thijss26, manic01, wolftje et al,

c.nl (19.2°E) did not open for me on 5402 HD using new Original Software and new Phantompatch
Most French SD channels (19.2°E) freezing every 5-6 seconds
Blind Search still not finding certain frequencies
Signal Quality bar still only showing 5%-9% on unlocked transponders

Best Wishes,
Zorch
 
Last edited:
Hi again all,

Re: Technomate Original Software-TM5402HDCI__120.zip (5.83MB)
Re: Phantomaptch-TM5402HDCI_ALL_121p_01-06-2012.stb (6.30MB)

New Original Software has also been released for the TM 5402 HD ...the new O/S v1.20 doesn't seem to be as good as the previous O/S v1.17 and Phantompatch 121 doesn't seem to be as good as Phantompatch 117

IMHO
If the new TM 5402 HD Phantompatch 121 had been based on Original Software v1.17 then all would (probably) have been fine...

So yet again I've gone back to using...

TM Original Software-TM5402HDCI__117.zip (5.94MB)
Phantompatch-TM5402HDCI_ALL_117p_20120116.stb (6.4MB)

@Phantom
Thank you once again for you continued support for all of the Technomate receivers... it is much appreciated mate...

Best Wishes,
Zorch
 
Noooooo. So close for us 5402 owners. Keep going Phantom, nearly there....

Also, viewing system info page crashes the box here.
 
Last edited:
The same procedure as every patch upgrade...

Tried the new 6900 super patch

TNT freezes every 5 secs except on HD and a few others.
C+NL not open
longer transponder change time.

although on the plus side - there is a new graphic when the box reads the USB stick.

Returned to 737p.
 
just tried on my TM 6902 and yes c.nl is open for the first time on the "02"models thanks for that Phantom loving it
seem to have lost the capability to use the upgrade menu in the ip settings menu with p.patch 120 and p.patch 121 hopefully this will be fix in the next patches
don't see any other changes
Dammn just noticed when i disconnected all payserver lines in the server menu to see if c.nl was working with new patches and everybody saying it's not working that my 6902 was still connected to my Vu+ wich is connected to the v-plugserver on my p.c. that can share with 9 other stb wich clears c.nl perfect
gues i wanted the package to open with the emu on the tm so much after all this waiting that i just expected it to open the c.nl channels.
But when i disconnected the line to my Vu+ the scrambled channel notice did come up again.
So another disapointing patch (with high hopes) sorry about the misinformation guy's:sad:
 
TM5402HD, I loaded the new patch and the system info menu crashed the receiver multiple times I returned to an older patch. This patch is not ok for TM5402hd as I cannot choose the provid anymore ...(System info- CAS - Blue button)
 
the Download center has been censored again ,all the feedback about the 1/06/12 patches is gone and a nother reply of "all problems will be fixed soon nots taken 02-06-2012" has replaced them
 
well as Ive said before they read this forum :) and constructive criticism wont be removed from here

by removing customers feedback it's antagonising them

any files you find that may help members, upload them to the downloads section as its also been know for files to be pulled without notice :)
 
I have another TM5402 problem that I have not raised before. Would apppreciate if another owner with a motor could try to replicate this.

Pick 2 sats which are quite distant from each other so you have enough time to try this.
4.8e and 28.2e should be fine.

Tune in to any channel on 4.8e
press SAT and select 28.2e
Motor will begin to travel to 28.2e
while it's still moving, pick a different channel on 28.2e
Motor stops dead immediately, wherever it is.

The only way to watch a channel on 28.2 now is to select a different sat, then select 28.2 again.

This didn't happen up to v112p software, you could flick around the sats no problem. I had assumed my motor was at fault, but I reverted back to 112p yesterday and it's working properly again. If it wasnt for the now/next feature i'd stick with 112.

Same for anyone else? Cheers.
 
Hi again all,

I've just been in the Download Centre and I noticed that Phantompatch 171 for the TM 5402 HD has now been removed...

But... the latest (1st June) patches for the models below are all still available... question is... why haven't they all been removed...?

TM 6800 HD Super
TM 6900 HD Super
TM 6902 HDT2
TM 7100 HD
TM 7102 HDT2

BTW... yet another new patch for the TM 5302 HD has been posted today...

Best Wishes,
Zorch
 
The phrase 'they couldnt organise a pi** up in a brewery' springs to mind? lol!!!:nopity:

(Also not quite sure what their comment with patch 746P of "problems with 30w-9-19-13-23- east satellites fixed" - but at least it was something to actually HAVE a comment I guess?)

So maybe if they only make this comment, they really are hoping to complete the rest of problems in near future as the say on D/L Centre - including C Ned 19E!
 
Last edited:
Back
Top