first time patch on 5402HD

cfipro

Inactive User
Joined
Jan 20, 2011
Messages
105
Reaction score
34
Hi, going to get the 5402 superHD, I had the 6800 NON super for a while so I am familiar with patch (might be "stupid" to swap a 6800 for a 5402 but this isnt my question...). I read that super models have "addon", is that the case for the 5402 ? OR do I just need to load phantompatch + softcam the same way I did for my 6800nonsuper and nothing else?

Really sorry to be dump, but also says factory reset ... save channels list...load patch...load factory reset...dont know exactly the right way...

BIT nervous about that, on non super never had to do all that...?! please could someone help me on this? dont want to screw up the box on the first try. Many thanks
 
hello mate have a read of the thread"newbie needs help on a new tm 5402HD" from the 19th dec 2010.its load patch 1st then add on then latest softcam.use the 106 patch and addon from the technomate software on line site by digidude the softcam is on this site.(the stuff I posted on that thread are out of date now)
 
THANK you , i'll have a look there and back to you if unsure, thanks again.
 
Last edited by a moderator:
Many thanks, so apparently no need to do factory reset, before, while or after loading the patch and addon ? ? ?

good, it looks nice and easy... it's even unzip/unrar in download centre, straight to usb stick and stb...
 
Many thanks, so apparently no need to do factory reset, before, while or after loading the patch and addon ? ? ?

good, it looks nice and easy... it's even unzip/unrar in download centre, straight to usb stick and stb...

i would always do factory reset before loading patch mate ,and after you put back channellist if your going to use cccam rescan all channels.

and next time your going to patch backup channel list
1)factory reset
2)load original tm firmware
3)fac. reset
4)load patch
5)put back channel list and rescan all sats.
only this way you will a very little problems with cccam
 
Last edited:
manic, I got to ask what are the blindscan problems with the TM-5402?
 
a lot of people got this box lately and there is a lot of people asking questions about it on all the forums,i suppose the price is right.
I just like to know can you setup this stb for cardsharing (setup as server)or can you only recieve for c.s. the man from the dark was saying you can't c.s on
it .just like to know if this is true.
 
a lot of people got this box lately and there is a lot of people asking questions about it on all the forums,i suppose the price is right.
I just like to know can you setup this stb for cardsharing (setup as server)or can you only recieve for c.s. the man from the dark was saying you can't c.s on
it .just like to know if this is true.

its a closed receiver just like the TM68/69super/7100 it works with ADDON CCcam and newcamd servers you see here @ https://www.digitalworldz.co.uk/index.php?threads/249099/

i dont have one but i be speaking to some people and they same it is the same but got a bit more to it but if better we ask digidude more he no abut it,
 
Last edited by a moderator:
Not forgetting the blindscan issues as well that need sorting?

Of course not. They do have to fix, for sure, the f@ckin' sensitivity range of the tuner, that embarasses the rest of the rivals with it's efficiency. You can't ruin the competition's dreams. It's an unfair and insulting stance.

Shame on you, you Technomate spoilers!

I demand the immediate downgarde of your hardware standards to the competitor's levels, as a punishment for your arrogant engineers who dared to challenge the so-called.....Multi-Box.

:Wave:
 
Bought the box today...great box...

BUT !!!...because it took me quite some time to setup my motorised dish and havent finished yet to scan and to do channel list(as I like)before loading patch and add on, I thought I'd try my diablo2 to see if I'd get all the goodies with it...
WELL, what can I say(have tm official 103 on it) ...THEY simply dont work together, get freezes VERY quickly, if you change channels it freezes and need to reeboot to have them back, if you go in menu to change diablo setting, the TM just go blank and need to be turned off at the back, have a bistv card for 5W the diablo needs to be removed if not channels arent properly cleared by card(freeze) AND WORST OF ALL, simply cannot get pltv on 10E (WORKING ON MY 6800, patch off!!!) why?

Any thought would be very welcome many thanks in advance
 
what you mean" patch off" there is a way to turn on or off your patch
can't think off the code right now but i'm sure somone else will know
aslong as your sure the latest patch is loaded on it. Download center
 
toggle the patch on and off my pressing menu, go to system info and press ok, then enter the numbers 2004, the CAS and BISS menu options will vanish, turning the patch off, press 2004 again to reactivate ;)
 
tm official 103 on dont work together m8


you have eveything in here m8

1) patch106 on 5402HD @ http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=10

2) ADDON_002p @ http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=6

3) Channel 30W-42E-TM5402 @ http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=7

4)Latest TM Softcams keys @ https://www.digitalworldz.co.uk/index.php?threads/253293/
+++++++++++++++++++++++++++++++++++++++++++++


you have eveything in here 2 m8

toggle the patch on and off my pressing menu, go to system info and press ok, then enter the numbers 2004, the CAS and BISS menu options will vanish, turning the patch off, press 2004 again to reactivate, Thank You to digidude

TM-6800 Non Super

1) Phantompatch-TM6800HD_703p-12-1-11 @ Download center

2) Latest TM Softcams keys @ https://www.digitalworldz.co.uk/index.php?threads/253293/

3)For quick access to the Biss and CCW Keys menu select 8280 on your remote control,

4) go to that channel 10.East PLTV and stay on it and Manual insert Biss Keys on remote control line and key in 32 digit biss key DCD49848ED683489 DCD49848ED683489 EXIT and save should be working ok m8
 
Last edited by a moderator:
toggle the patch on and off my pressing menu, go to system info and press ok, then enter the numbers 2004, the CAS and BISS menu options will vanish, turning the patch off, press 2004 again to reactivate ;)

Yes, this is what I did on my patched tm6800, turned patch off , tried my diablo2 and "everything" was clearing; on my unpatched 5402 with official and latest firmware, my diablo2 was only clearing for few minutes channels BUT none of the BISS will clear(pltv clears on my 6800 but not on 5402 with the same diablo2...?)

Despite of that, I have NOT notice any glitches (so far) on tm5402 loaded with official firmware, once again, doesnt seem to like diablo2... will try to load phantom patch later today...

Sorry for being a pain, and THANK YOU for your help and patience, screwed up a box in the past simply dont want this to happen again...
will I need to perform factory setting + load patch + addon + softcam everytime a new phatom is available?( easier way for saying that: does new addon come everytime with a new phatompatch and need to be loaded after each new patches? )
 
Last edited:
I am seriously thinking about one of these boxes as I like my TM-5400 non super so much (although they really pi$$ed me off when they brought the super version out, just dont want to be caught again)
Are there any known problems with an external hard disk? size limit, brand etc,
whats it like as a pvr?
many thanks
 
Sorry for being a pain, and THANK YOU for your help and patience, screwed up a box in the past simply dont want this to happen again...
will I need to perform factory setting + load patch + addon + softcam everytime a new phatom is available?( easier way for saying that: does new addon come everytime with a new phatompatch and need to be loaded after each new patches? )[/QUOTE]

no the addon does not come with each patch when there's a new rewritten addon they will put it in the downloadcenter for the tm's that need it
we are on 3_addon
 
Of course not. They do have to fix, for sure, the f@ckin' sensitivity range of the tuner, that embarasses the rest of the rivals with it's efficiency. You can't ruin the competition's dreams. It's an unfair and insulting stance.

Shame on you, you Technomate spoilers!

I demand the immediate downgarde of your hardware standards to the competitor's levels, as a punishment for your arrogant engineers who dared to challenge the so-called.....Multi-Box.

:Wave:

Fact
From a well known respected feed hunter.
"The TM5402HD has several bugs one being in the blind scan mode it will find a symbol rate of 45,000 for an actual symbol rate of 6666"

Now I don't have one so can't confirm, but this person posts feeds on satelliweb and satbenelux and knows his stuff on blindscanning.
 
Back
Top