Below 37 extra functions are not available in Dream box DM500/DM600 receivers
New s/w for tm-500 Super /600 Dated 09-01-2011
-----------------
For tm-500 Super-600 hot key functions,Ect, as below
1-press info 2 times see signal and all other info also use arrow I/R for more info
2-Press LAN to see full LAN info and edit,
3-Press RED batten to download softcam key...no need of doing one by one from each sight..auto find about 5 sights.
5-Press < below number 7 to update LAN connection
6-press edit direct access to edit menu
7-press UHF direct to uhf menu also you can see uhf channel number in the front panel no need scanning you TV for 2nd room.
8-To download s/w {image } no need of any password or control centre ..hold standby batten and turn on from rear see 2 or 3 digits of box ip ..
then use explorer in windows type 192.168.1. ??? then last digits of box ip press enter ..that's all.Mini Web
9-for C:line F:line and other upload download use same as number 8
10-RF modulator 65 db gain
11-RGB loop from 2 scarts for rgb recording,
12-Image download direct ..no need of pc [ press LAN=BLUE Button
13-press blue button 2 times see choice of cams/old cams/extras /channel lists up to date
14-press ok then L/R to see list and change channel
15-Delete channel list direct..press blue batten then go to add-on manger highlight the list press red batten to delete..no need factory rest or re boot.
16-To test if LAN connected or not..press LAN button ,,you can see in the front panel neon bulb going up/down trying to re connect or giving message some thing wrong.
17-sat button ..direct access to satellite list
18-Diseqc and usals works 100% perfect for motorised dish.to increase speed when motor moving in 18 volt Horizontal ,
19-Internal power supply
20-54 key functions remote control
21-8 Functions front panel keys.
22-10-segments front display
23-quick factory reset,
24-Sound quality improved by using high quality HIFI pre amplifier Line out as well as optical out,
-------------
For TM-600 USB PVR above and bellow
25-USB button direct to USB menu
26-one button record and stop.
27-3- USB to pvr all can record play
28-Press File list button for all your recording.
29-Press info 2 times then 123 see choice of cams to read your card id only in mgcamd.
30-components out put to increase picture quality.
31-housing for 3.5 inch hard disk.
32-hydraulic slow opening front panel super high quality built
33-RGB in 4 positions RGB-RGB1-RGB2-RGB MAX very unique function this is done by increasing memory on mainbord to increase picture quality to maximum possible very close to components and HD out put.
you can see the difference in large screen TVs
Go to av setting and set RGB AS YOU LIKE in tm-500-600
34-Card reader menu in ur sr s/w
35-16MB of flash and 75 MB of sd ram in both tm-600-500
36-personalise your password 100% impossible to see any adult channels or information even using any FTP or TUX
this function is not totally secure in DM.
37-Super fast channel change and Navigating trough menus-This is done extra memory on main board.
- NO WORKING DYNAMIC DNS client
ive highlighted this many times in emails over the last year or so
I can see why this might be a low priority fix for UR team, knowing that most routers nowadays have a rather bullet proof DNS updater built in, but still it shouldn't be ignored.
Another difference is the ability to read the white card using Cccam only, and the price difference between a dm500 clone and a tm500,approximately twice the price!!
Below 37 extra functions are not available in Dream box DM500/DM600 receivers
12-Image download direct ..no need of pc [ press LAN=BLUE Button
I'm far from being an expert on the sat scene (or any scene for that matter) but I do recall being a member of a cable forum where the itgate was the preferred box, and the UR image (cable) had the facility to download via blue button so ya, nothing new there then..
Interesting thread guys, but who writes the release info? it smacks of unprofessionalism to have all those grammar and spelling errors on it, it makes it very difficult to understand.
Any reason why this seems to be the case on most of the documentation released for open source boxes?
Yup.,,,Satkings...and it's no co-incdence...TM500/600/800 all = ITGate recievers...rebadged as TM. The same crap devleopment team as well "UR Team".
We use essential cookies to make this site work, and optional cookies to enhance your experience.