got black screen death. no hdmi

mx mx2 mx3 m8 and such
hxxp://ember-dev.com/downloads/
it gets you back up and running so give it a go.

I've got 2 Black screen boxes If this works you will be a hero. I will try it later. Thanks very much

if you get stuck try this aswell.
1gb / 8gb AML8726MX / Meson 6 / M6

It is very simple to install, just insert a 4gb or larger SD CARD into Windows PC, use this program to set up the card: http://hddguru.com/software/HDD-Raw-...02Portable.exe

Then use the extracted sd card image file (of your choosing) as a source and set a target to your sd card (4 gb), it writes the image, close the HDD RAW COPY program and eject the card (SAFELY - choose eject from PC, right click menu + eject).

FILE: Matricom image Matricom Midnight G-BOX MX2 v1.1.5+ image (August 9th, 2013)

WARNING: THIS METHOD WILL ERASE EVERYTHING FROM YOUR MX BOX AND INSTALL A NEW ROM. USE AT YOUR OWN DISCRETION.

Matricom image (Android 4.2.2): OTA works for XBMC etc
- Make sure MX device is powered off and power cable removed.
- Insert SD card you just created.
- Insert a match or a toothpick to reset hole - you will feel a click. (AV hole in the back)
- Power on the MX box by inserting power cable, while holding the match in the reset hole.
- It will boot to recovery and start installing ROM.
- After finishing it will give 2 errors - these do not matter.
- Remove power cable and insert it again, the device will boot as MATRICOM MIDNIGHT G-BOX MX2

THIS IMAGE WILL ALSO UNBRICK THE DEVICE.