starview 7 probs

spliffy

Inactive User
Joined
Aug 27, 2010
Messages
62
Reaction score
1
Just got starview 7 box downloaded new software but on network its nots showing u stream just ip setup and sw download sorry but ive googled and searched as much as i can anyone out there could help me out
 
After you download the firmware,go to sly sports 1,key in 1819 and that will do the trick......
 
After you download the firmware,go to sly sports 1,key in 1819 and that will do the trick......

hi i have a starview 7 thats never been opened , what do i have to do and does this still give m the 12 months access ?
do i need special software loaded on t this?

thanks guys
 
hi i have a starview 7 thats never been opened , what do i have to do and does this still give m the 12 months access ?
do i need special software loaded on t this?

thanks guys

Hi

Think you will need to put on "theshowmustgoon" firmware on as follows.

afaik people who have had sv before will get new 12 months from time they put this new firmware on so you will too providing that is server is still running in 12 months time though lol. For the moment just get what usage you can out of it.

1. Copy the file to your USB pen drive
2. Install
3. Restart
4. Do a factory reset
5. Scan for channels in your area
6. When channel scan completes go to a channel and type 1819
7. Wait a few minutes and connection should be established
 
i cant seem to download from stick strview box says when you go on to usb
options to sort or save am i doing the right thing
thanks
 
hi cld u help me i hv dwnloaded firmware on box, can see channels on list but sayng scramble. what do i have to do to bring it to life, put the lan cable in, where ONE PART IN THE BOX and the other? i the back of computer, dont understand what that does but i was told it needed to be brought to life, what does that, am i putting it in wrong place? i only have star vew box
thanks, i am going crazy now
 
hi cld u help me i hv dwnloaded firmware on box, can see channels on list but sayng scramble. what do i have to do to bring it to life, put the lan cable in, where ONE PART IN THE BOX and the other? i the back of computer, dont understand what that does but i was told it needed to be brought to life, what does that, am i putting it in wrong place? i only have star vew box
thanks, i am going crazy now

now mate it goes in box and wireless modem then will work
 
hopefully you have the box,and rs232 cable to connect to dongle and you supply the lan/internet feed
 
Last edited:
oh dear, i dont have modem near computer, i have wirelss connection from usb into my computer my hub is in another room, does this have to stay in or just while setting up. I could possible take it in to where hub is to do but not sure it will reach actually! once I go through process if connected to hob and finds the channels etc can i take lan cable out and use on my tv then or does this have to stay in permanently?

what a performance!!!
Thanks
 
oh dear, i dont have modem near computer, i have wirelss connection from usb into my computer my hub is in another room, does this have to stay in or just while setting up. I could possible take it in to where hub is to do but not sure it will reach actually! once I go through process if connected to hob and finds the channels etc can i take lan cable out and use on my tv then or does this have to stay in permanently?

what a performance!!!
Thanks
 
oh dear, i dont have modem near computer, i have wirelss connection from usb into my computer my hub is in another room, does this have to stay in or just while setting up. I could possible take it in to where hub is to do but not sure it will reach actually! once I go through process if connected to hob and finds the channels etc can i take lan cable out and use on my tv then or does this have to stay in permanently?

what a performance!!!
Thanks

If your modem/router is in another room then you could invest in some home plugs - they send ethernet/modem signal through your wiring system in your house - you will need 2 of them 1 from router to homeplug and the other goes near your box so you can provide with signal anywhere in house on ring main - i use about 5 of them and they work great - try here about the cheapest ive seen from faculty-x - just use the 85mbs ones they are fine.
 
If your modem/router is in another room then you could invest in some home plugs - they send ethernet/modem signal through your wiring system in your house - you will need 2 of them 1 from router to homeplug and the other goes near your box so you can provide with signal anywhere in house on ring main - i use about 5 of them and they work great - try here about the cheapest ive seen from faculty-x - just use the 85mbs ones they are fine.

thanks a lot for that i will have a look x
 
just posted on your other thread lol,yes agreed homeplugs are good for that setup.
 
Hi, hurrah, you will be pleased to know I hve managed to work it out!!! well almost. I finally got channels scanned in etc and connected lan cable and it worked !! the only thing I dont seem to be able to get all the channels, no films, gold etc, quite a lot that I cant get although they are on the list that comes up (approx 318 channels) I have scanned in autoscan, and tried the other two frequencies is there something else I should be doing?

Thanks
Tezzerbabe
x
 
thats about right m8 it seems limited at mo - only certain stuff seems to be on server - if you have got sports then thats up to date m8
 
oh right, do we just have to keep trying and rescanning to see if any more on?
x
 
once you did a fresh scan they should just come on when activated,some people dont scan and when frequency changes channel stops:proud:
 
hi u wont believe it, i have got another box and am trying to do the same and it just wont have it!! it is showing all the channels some 340 of them, i switch off at the back, put lan cable in, switch off router wait then put them all baack on when broadband up i go to ssp1 and put in 1819 but doesnt connect !!! oh i am losing my mind, would you mind awfully if you could send me step by step instructions as to do what, i have what u told me last time but just not sure if missing something!! do i have to reload ups file again or once on my stick can it be used again

x sorry to be a pain but i just dont know why it is not connecting, the other one is fine now most of the channels there xx
 
it not just you plenty of boxes are been rejected by no connection,someone higher up may know whats happening,if not it will be a fta box,yes pain in ass i would agree
 
oh no, although it is the same box as mine, only did a few days ago???
 
Back
Top