help ,,skybox f3 gone off no power light

alotmentman

Inactive User
Joined
Mar 21, 2012
Messages
45
Reaction score
5
hi to all my sky box f3 ,,box gone dead on me ie it got no light onit no response ive tried using the r322 lead and tried to recovewr the box when i try to load the files through port 1,,,it keeps coming up with ,,synchronizing,stbs reset target ...also set stb memory error can some one send me all the right firmware to get this box back up and running tried turning box off and on etc ,,,,all info appreiceited thankx
 
hi to all my sky box f3 ,,box gone dead on me ie it got no light onit no response ive tried using the r322 lead and tried to recovewr the box when i try to load the files through port 1,,,it keeps coming up with ,,synchronizing,stbs reset target ...also set stb memory error can some one send me all the right firmware to get this box back up and running tried turning box off and on etc ,,,,all info appreiceited thankx

this might sound mad but have you check the fuse on the plug of the box, could be it gone? worth a look.
hope this helps
 
Have you ticked the include boot loader option on the recovery software and make sure you switch on your F3 only after you have pressed next on your recovery software.
 
hi mate thanks for reply yes ive checked the fuse and ive turned box on when pressing the next button ,,,still no joy it says reset stb ,,,,,
 
Have you specified the correct com port on the recovery software, you can check which com port you are using by going into the device manager.
 
yes checked psu ,,,even got another f3 box and connected display unit and power board to it all working fine ...can you run the sequence through on what recovery method you use ie from firmware to way you do it im lost
 
you need to run eprom upgrade programme with serial lead not usb to serial its on this forum somewhere and contains a flash file you can update firmware once box is going the upgrade programme contains instructions
 
Make sure you tick the include bootloader option and wait about 10 seconds after pressing the next option before you switch on your box, if you are getting the error before you are switching on box try to get another cable.
 
Nothing to day but need to post 5 times so there it is


another 4 to go
 
my f3 has a blue screen now , when i power it up it goes from L1 to L100 then the box displays STYPT , any ideas folks?
 
my f3 has a blue screen now , when i power it up it goes from L1 to L100 then the box displays STYPT , any ideas folks?
no don't think it is allowed m8 ,try other sw you could have wrong sw on box if its constantly rebooting
 
Back
Top