Search results for query: *

I seem to be getting a problem with pixellation on BBC1 HD and ITV1 HD channels on Astra 28.2E Signal quality etc is high 85% and I have a large dish (1.3m) Weak signals for Nilesat 7W seem to be received OK I do have Power Supply problem (USB not working) Does anyone have any suggestions...

Unfortunately my USB is "stuffed".....3rd PS failure so I was trying to circumvent using a USB by connecting onto my LAN....Since the TM could see the patch I thought it could run the installation

Ah so it needs to copy onto a USB attached to the TM before it can do the patch..I thought it just ran directly from the PC from which I was connecting across the LAN. Isn't the point of STB Daemon the ability to run directly from a network drive .....there was a brief flash of an update screen ?

I'm having a problem installing a patch using STB Daemon 3.04 I can "see" my PC file system via System Settings -> IP Settings -> Firmware Update but when I select [OK] after having selected the patch to install...there is a quick flash of the install screen and then it returns to the IP...

Do need to "tune" the LNB when I'm set towards my weakest signals e.g Nilesat TP = 11938V ?

I'm finding the satellites OK but I wasn't getting the signal strength on some TPs. e.g. all Hotbird TPs were vewry strong but I lost a number of Astra 2s What is the criticality of this setting ? Is using Thor as a reference point good enough. i.e. with the motor set to "0" ? BTW I am tuning...

I have 1.3m dish and a Technomate TM-2200 motor attached to a TM-6800HD Super During the recent gales my dish rotated on its bracket and I had to realign it. In the process of retuning I found that I "lost" a number of the weaker TPs on 28.2 - the whole signal strength had dropped by 10-15%...

How do I do that ?

Bit of an old thread I know but I've had two new power supplies fitted to my 6800HD Super which cured this problem

I suppose you have checked that your dish hasn't been shifted in the gales. I know mine rotated on its mount (horizontally) and I had to reset it. I may need to look at its elevation has well

Same problem here. Most of the MBC channels are very weak (MBC1 has completely vanished) and even Fox is down to sub 50% I'm using a 1.3m dish in W London with a TM-6800HD-Super

I have a TM-6800HD Super. I'm interested to know abou the uses of the ethernet connection that is provided ? Apart from using this connection to access card servers and updating the firmware can anyone tell me what else this facility can be used for ....can I (for instance) stream IPTV...

Thank you for a most informative article. A couple of things that I'm not clear about 1/ Using the CAS editor. I understand that having uploaded the softkeys that they are allocated to the slots but I'm unclear about this editor should be used. 2/ I am happy abou entering values through...

Rotana on 11296H is usually quite reliable. We can also get the MBC 1..4 channels (on a vertical transponder) but they seem to be misbehaving this morning !!!

Thanks XXXXXX In fact did a factory reset before installing TM's official 747 (I'd had a problem with the USB and thought that would cure ...in the end it was the Power Supply which was replaced in Edmonton. So 748 should cure this ? What does ON_002p do ? Just remind me how I back up the...

I have a TM6800HD Super with S/W version 7.47 installed. It's linked to a TM sat motor driving a 1.2m dish I basically view three satellites Astra 19.2E & 28.2E, Hotbird 13.0E, Nilesat 7.0W. I've notice that I'm having a problem in locking onto channels when I change sats by selecting...

Upgrade my TM6800 HD Super with the latest software version 741 and noted the following "strange conditions" :- After the 7-day EPG was loaded the following sometimes happened :- 1/ HD channels would "sometimes" not display properly - "No Audio/Video" 2/ The PVR stopped functioning...

Followed your instructions to the letter ! (Thank you) and my HD channels worked OK after EPG refresh with the phantompatch installed. BUT my PVR has stopped working. None of the the old "recordings" playback and it wouldn't record either ! Backed out the phantom patch and it's working again ...

What is the best way to back up the channels and will it include Favourites as well ? Do I have to worry about my motorised dish settings - not sure if these are "saved" in the motor itself or are part of the receiver data ?

Well it was a TV channel I loaded - not a radio one because I was viewing info from Sky about installing their set top boxes. I loaded the patch via the USB using what I assumed to be an install procedure i.e using the USB > File (menu options)