I counted eleven strips in your picture, there should be twelve for this model. The screen on this model is not glued in, so after removing the bezel it should lift out. I always tape the screen PCB to the screen as the flexi cables are quite fragile also when you remove the reflector sheets...
Hi Spud.
The screens are fragile so do not let it flex when lifting. Suction cups are good for lifting the screen. Before you try lifting it make sure the panel is not taped or glued down because if you apply to much pressure in lifting the screen will crack. If you let me have the full model No...
You want to use a early verion of utorrent the new versions are full of adds. I run 2.2.1 and it runs fine with no adds. If you can not find it let me know and I will send it to you.
It should be straight forward. You can pair the card by phone or if he has Internet you can pair the card that way. If the new box is a twin tuner version and your uncle has only one feed you can turn it into a single feed box in the menu.
Hi.
This is what it is for from the site.
Ford FX 2016 torrent
18th May 2017, 19:45
ford fx 2016 torrent
Mondeo MK4 (2007-2011)
Focus Mk2.5 (facelift)
Focus Mk2
S-max (2006-2012)
Galaxy
PM me and I will get it for you.
regards
The one I made is taller than you need. The one on ebay looks like it is made from a Zelman CPU cooler just stuck on to a heatsink with the peltier sandwitched between. I wonder how well the plastic fan would stand up to the heat of the stove. The one I made has a metal fan I robbed from a old...
Hi.
Very simple to make have a look on utube lots of info on building. I made one myself. Just make sure you use a solar type motor or it will not work. You can get most parts off ebay.
The price of a new screen would be as much as a new TV. The only option would be a second hand one. You would need to get the screen number off the back of the screen as a lot of the same models will have a differant screen which is not interchangable.
Hi.
Some of the Samsung Plasma range are noted in the trade for faulty screens. Your best bet is to take it to a local TV repair shop to inspect it before you start spending a lot of money on parts that might not cure it.
Any 330uF cap will do if the voltage is 16v or above. It would be best to use 105 degree caps. Just make sure the cap goes in the right way round + to + -to -.
Be careful if you use a solder sucker as it can suck the tracks off the pcb if you are not careful. Your safest way is to use braid. It helps if you add more solder to the joints before you try unsoldering them. Also do not have the iron to hot as this can also lift the tracks.