Technomate : CCcam with SSSP , (SSSP-HADU)

wolftje

DW Regular +
Joined
Dec 12, 2008
Messages
1,098
Reaction score
385
Location
Belgium, The land of waffles ! Really ?
And another one to test.
Please Test And give some feedback.
I can get this working for 5secs (connected towards 2 cccam servers)
But after 5 secs the SSSP dies...
I think TECHNOMATE has poorly implemented SSSP ....
PLEASE Technomate Implement a working SSSP that is stable like the humax ?
In humax you can set these setting but on Technomate they do not exist.
card+s+emu
ecm+emm
sssp


Unpack in a directory
Launch SSSp Plug with the correct Serial COM port in combination with a nullmodem cable

do not forget to add cccam servers in Hadu.ini. (Latest Version CCcam is supported ! )
I have put 2 examples of CCcam
1 external and 1 internal

All the settings are ok. But please give some feedback !


Have Fun testing this !
 
Last edited:
Try star cccam its more stable than flycccam but the channels we are interested in still freeze each time a new key is sent. Edit the star cccam file in plugins folder with your details.

On Humax there are no reported problems Technomate need to sort out sssp to stop the freezing.
 
I will try this, and "Acamd" as well is on the menu this evening.

Exactly what i was thinking .... Every time a new key is sent it seems that SSSP technomate is not even asking for a new key at that moment ...(if i check the logs)

Technomate really needs to make SSSP work !
But what is strange, when i Use for example : Vplug Sbcl + WSP , SCT Hack, this works ....
is it something to do with the tools ? SSSP plug ?
But to be honest WSP, windows sharing pack is really rubbish compared toxwards when i connect it with a perfect 100% working newcamd server that is working fine with a diablocam newcamd client ....

WSP is utterly not good for SSSP with Technomate, thats my opnion ...

SO what is wrong then ???

Digidude, thanx in advance for sorting this out :)
 
Last edited:
I've managed to get it working 100% without freezing on any encryption using a different software.

I will post a full tutorial shortly.
 
Could it be HDVB1.1.4 ? I hope it this, coz i just downloaded it and i will test in the afternoon :)
I googled your nick and i came on another forum where you attributed to CCcam client freezes post :)
If its true, this must be the solution for all gbox & CCcam SSSP lovers around and also DVB users !
 
HDVB1.1.4 seems a great tool.

I can get the follwing Gbox and CCcam together... :
[5/01/2010-12:25:26] - CCcam (192.168.100.12) -> (391 ms)
[5/01/2010-12:25:26] - ==== ECM on CaID 0x0100, pid 0x071F====
[5/01/2010-12:25:26] - Prov:220E
[5/01/2010-12:25:26] - CW0:9AA79BDCB29E7FCF
[5/01/2010-12:25:27] - CW1:B9ECBA5F4AE9F023
[5/01/2010-12:25:27] - =======================================

[5/01/2010-12:25:39] - ECM: 030066071F813061006C00000E00EFC8BD33BBC8F607C3B4C4813166F4F92024E3FF632C9F9CC14BF6D57476ED610B1A7B718FE2CEBFFF9356F60266F5D6FE5B0CFD3B2A5B0F7D5B60854C7F7E99C0ADD60C84619DC29E016E3FE5A4167E89D2481AA5170540ADD6B9

[5/01/2010-12:25:39] - CCcam (192.168.100.12) -> (391 ms)
[5/01/2010-12:25:39] - ==== ECM on CaID 0x0100, pid 0x071F====
[5/01/2010-12:25:39] - Prov:220E
[5/01/2010-12:25:39] - CW0:19083E5FD238EDF7
[5/01/2010-12:25:40] - CW1:B9ECBA5F4AE9F023
[5/01/2010-12:25:40] - =======================================

[5/01/2010-12:25:40] - Channel data update
[5/01/2010-12:25:40] - CaID :0100
[5/01/2010-12:25:40] - Sid :31E7
[5/01/2010-12:25:40] - Pid :03E3
[5/01/2010-12:25:40] - Prov :00006A




But no image coming up ...

COM PORT 115200 delay 1000 SSSP, any idea ?

In CCcam.cfg i Put :

Wantemus=1
Active=1

MaxHop=3
NodeID=
# I do not want this cards
CaidPr=1810:00000000
NooSid=
 
Re: Technomate : Gbox/CCcam with SSSP ,DVBHD Working 100%

Thanx to sakiblateef for pointing me in the right direction
I Have a 100% running config with SSSP on a TM5000Ci+ USB
Gbox and CCcam together !!!
You need the software HDVB : taken from this site originally : http:// sisnagra DOT webcindario DOT com/hdvb DOT html


configure COM port, MODE SSSP
Speed : 115000
Delay Tx : 1000
AutoAdjust On
Open ComPort to activate SSSP(this you better do after you have started Gbox and/or CCcam connections)

Settings that worked Good for me in CCcam.cfg
[CCcam]

Wantemus=1
Active=1

MaxHop=3


#CCcam Servers syntax #
C: CCcamserver.dyndns.org port Login Pass 0
 
Last edited:
Yes I have it running on HDVB 1.114. My settings are a bit different it only takes about 5 seconds to open channels between channel change. I'm about to post a step by step tutorial with pics.
 
I was using the 1.1.4 version as I was having problems connecting using the 1.1.5. The tutorial is now posted in the other thread.
 
hello im newbi here could any one tell me if sssp thing is compatible with tm9100s or is it only for certain tm boxs
 
Hehe,

well i would use CCcam client straight from the receiver.

SSSP is used a lot for older receivers like tm1000/1500/5000 without ethernet connection.
By using your pc and running cccam on the pc give codes by serial cable by SSSP protocol towards your Technomate Receiver, Like this you can watch something 'Extra' wuthout the need of a dreambox or more expensive TM receiver.

Also with SSSP protocl you can for example run VPLUG on your PC and pass the coded towards your technomate receiver.
Most EMU hacked watchable channels are implemented in The Technomate. So for EMU you will mostly never have to use VPLUG-SSSP.

exception : Excellent SSSP Post by COmpass who compiles from time to time 'a package' that opens up lots of different providers by Using SSSP protocol & some Free 'service' on the internet.

Did you know TM500 & TM600 are very cheap Linux receivers ? If you'r interested in a TM cheap linux receiver you should def. go for that.
 
Last edited:
Hehe,

well i would use CCcam client straight from the receiver.

SSSP is used a lot for older receivers like tm1000/1500/5000 without ethernet connection.
By using your pc and running cccam on the pc give codes by serial cable by SSSP protocol towards your Technomate Receiver, Like this you can watch something 'Extra' wuthout the need of a dreambox or more expensive TM receiver.

Also with SSSP protocl you can for example run VPLUG on your PC and pass the coded towards your technomate receiver.
Most EMU hacked watchable channels are implemented in The Technomate. So for EMU you will mostly never have to use VPLUG-SSSP.

exception : Excellent SSSP Post by COmpass who compiles from time to time 'a package' that opens up lots of different providers by Using SSSP protocol & some Free 'service' on the internet.

Did you know TM500 & TM600 are very cheap Linux receivers ? If you'r interested in a TM cheap linux receiver you should def. go for that.

My problem is that when placed in hadu.ini the Com port=1, after release SSSp plug.exe, in the box of comport there is nothing, it is empty?????!?
 
are you sure com1 is the comport you are using on yr system ? (you could check that in yr devicemanager, type in a command line without quotes " mmc devmgmt.msc " and look for comport number) Also it is HDVB you need (SSSP, CCCam all rolled into one nifty utility). What type of technomate receiver are you using ?

Latest version HDVB can be found here from the original source sisnagra2 : SisNagra Studio Team
(admin please remove if I can't post this)
 
Back
Top