about Tm 6900 super

diabman

Inactive User
Joined
Oct 5, 2009
Messages
5
Reaction score
0
Hi all

i have a 6900 super with latest patch and i am trying to run cccam on it

but all i get is after about ten min the picture clears then freezes after about 2 min and thats it.

the same happens when i put the cccam in diablo wifi

does any body know why this happens as the c line is supposed to be strong.

any help would be very helpful and i thank you up front
 
backup to usb via the factory reset menu, carry out a facvtory reset, disconnect from power for 30 seconds, reinsert your channel data and C: line data
 
backup to usb via the factory reset menu, carry out a facvtory reset, disconnect from power for 30 seconds, reinsert your channel data and C: line data

will give it a go thanks again:Cheers:
 
well i tried what you have said seemed to work a lot better. but only on nova, but when going to say digitalb then it works for 5 min then freezes then dark on all sat's.

in total it takes about 10 - 20 mins to first open anything. is this normal?

ping the the **************.com and all says ok

same with diablo wifi

could it be rooter problem.

i am using bt wifi v2 (black)

do i have to forward ports to 6900

many thanks again
 
Most likely a poor/overcrowded server.
 
if its the same with the diablo m8, then its more than likely an over crowded server

with cccam, people are able to 'start' a server without even owning a single card, they are able to re-share their share to an extent, so you and 20 other people could be paying to go on a server that doesnt really exist, and connection drop outs, pics breaking up, sometimes not available channels, are signs of this
 
Re: about Tm 6900 super , new patch and diablocam wifi

I noticed with the diablocam WIFI (wireless network)
-TM6900HD SUPER = by Ethernetcable fixed network-,

that the diablocamwifi is acting more slowly with the latest CCcam patch on
the TM6900HD SUPER+ when using the built-in Diablocam wifi Newcamd or CCcam.
I have a TM5400Ci+ USB Super i could test with at the same time.
The TM5400Ci+ Super acts very quickly in combination with the Diablo Wifi and the built-in functions.

The Diablocam Wifi does function 100% the same with EMU on both type Satellite Receivers when using NO NEWCAMD or CCCAM function of the DIablo.

on the other hand, NDS SKY UK, Viaacess SEXVIEW is functioning SUPERB on both Technomate 6900HD Super(newcamd & CCcam) and the Diablowifi (newcamd)

Other stuff like Nagra3 (premiere) or SECA3(new mediaguard) perform very poorly with the latest patch (Newcamd = OK, CCcam = NOK, breakups every 2 -5-10 minutes)

I hope this feedback was helpfull. Please feel free to post your feedback as it is very important for the DEVS patch TM to read all this stuff.
 
Re: about Tm 6900 super , new patch and diablocam wifi

thank you very much for all your help it has been very helpful.

and yes i have put it down to not so good server. so i will get back to them.

I have also read that the best place to be joined to a server of that nature is to be in hop1 and not 2,3,4 and so on.
As this is the best place to be as not much chance of breakups etc.

The problem out there is finding a good server. which works with the software around.

as ive been doing this now a quite some time and have used softcam, cards and patches which seem to work better.
Il will just stay on my search for a good server. free or not.

if any ideas just PM me

i will post all my findings as i come across them.


many thanks again for all what you speak
 
Back
Top