YOUR questions to technomate.

Hi digidude
2 things that should be working but don't:

1: with 2 tuners why can't you record sat & watch terrestrial?

2: AU keys for terrestrial (mmds chorus)
 
Re: Network recording

Do you think it will be possible to record over the network in the near future with the tm6900HD SUPER. I think this would be great !

Also, when are you gonna make it possible to built a harddisk into the Technomate 6900HD SUPER !????


The 6900HD SUPER is very large & too big in my humble opinion.
and there is no room for a Harddisk ? COme on !!! You can do better than that guys !!!

But besides that the tm6900HD SUPER remains very nice :)
 
A good one is the delay with the onscreen message dish moving to another satellite which from my experience with Technomates I have had 5 different models takes a while.
The moving bar appears 3 times once would be enough, you cannot access other menus while this is happening this slows up zapping between different
satellites.

Ed
 
A good one is the delay with the onscreen message dish moving to another satellite which from my experience with Technomates I have had 5 different models takes a while.
The moving bar appears 3 times once would be enough, you cannot access other menus while this is happening this slows up zapping between different
satellites.

Ed

it vanishes as soon as you have a lock on the required satellite, or if moving from say 42e-30w will show a couple of times then blank screen untill the satellite is reached

it dont actually slow up the zapping between sats, as you cant really make your dish move any faster (unless you always use a H polarity channel when changing ;))
 
Hi, Is it worth my while changing my tm1500ci to a tm5200usb ? . Is the tm5200 more sensitive and will it work better in fringe areas ?. many thanks
 
I have a tm 6900 super hd I am not very technically minded (I'm 72) I connected my tm to the computer but I couldn't get an IP address. Should this come up automatically or do I have to put one in Manually. If so is it a different address for each tm or is it the same I tried to find aserver but had no joy.
Can anyone please help an old thicky.
Peabody:Cheers:
 
Re: Recorded file types_Technomate 6900

Hi

Newbie; arrived 15mins ago today; with technomate problems on my mind.

I have Tech 6900 Combo and did my first recording today on Freecom 250. I have these strange files: .idx, .ifo and .trp.

my pc cannot recognise them and no file can play them at this time.

Has anyone got a clue as to how to proceed, please.

Hoping this ?? has been on the right forum
 
Re: Play back problem

I have recently recorded my first program via tech. 6900; using my external HD, but proble is, I can't play back recorded stuff.

Can someone advise how I can achieve this.

thanks in advance
 
Press File List on remote this will give a list of Recordings.
Select Recording and press OK.

I believe that GOM Player will playback the recordings on a PC.
 
"VideoReDo Plus" is the prog i use, can also edit them to make a DVD
 
Re: Play back.

How can I play back recorded programes on Technomate 69000 super Com.
 
I have the HD6900super. It would be really useful if the full IP stuck is fully implemented for the LAN. As far as I can tell all that it is used for is CS. It would be nice to use the LAN for other activities like file transfer to a server. Please let me know if that is possile in the future.
 
Hi digidude,

I've recently purchased a Technomate TM-3150D USB PVR and it all seemed to work fine until I updated the firmware to version 2.00 (08 JULY 2009) from the technomate website.

When I updated the firmware the usb port switched my usb drive on when the TM-3150D was in standby and switched it off when the TM-3150D came out of standby, which prevented me from recording anything, as it stated there is no usb drive attached.

I've emailed technomate and filled in their feedback form but have had no response from them.

Basically, I just want some firmware which will power on my usb drive when the 3150 comes out of standby mode and then powers off the usb drive when it goes back into standby mode after finishing recording. There must be some firmware somewhere that does this, as my original firmware did this but I can't find it any where on the net to download.

I hope you can help because I've tried a number of forums now with no success.

Thanks.
 
Re: Play back.

How can I play back recorded programes on Technomate 69000 super Com.

how can i put this / look i just say it, just go out and buy a dvd recorder with hard drive that what i done and all recording i play back and tranfere on to dvd without problems no hassel good luck
 
hi every one
i have this strange problem only first two place were u put the detail of newcamd setting of some one server is working ,

i mean we have four connection like conection _1 and soo on but when i put detain oin one and two it descramble the channels btu when i put the same setting in the 3 or fourth it says connected but dosent do any thing... i tried whith many provider its same... only first two work

plz help:eater:
 
Is there any way of updating the 6900HD so it can card share?
 
Last edited:
But that's with a 6900HD Super.What i want to know is,can i convert/upgrade/modify my 6900HD to a Super?
 
Back
Top