tm600 not scanning

crazydiamond

Inactive User
Joined
Jul 9, 2009
Messages
72
Reaction score
0
have tm600 which will only scan certain transponders, have tried different lnb, dish, cable etc, have flashed with other image even original.
snr on sly only shows at 45pcent but is the same on other satellites?
any suggestions please.
 
your satellite.xml file (database of what frequencies to scan) may be outof date m8
 
thanks didi, does the sat xml file not come with the image, i have reflashed with all latest images but still have same problem
have just connected a dreambox 500 and that scans with no problem??
 
Why don't you download one of the latest channel lists through the Blue Panel. This will give you most of the current channels and update the satellite.xml file at the same time, and it saves you waiting ages for the receiver to scan each satellite.

Regards

Liam
 
thanks liam, have one that but signal is to weak to show certain channels, best percentage is 45.
could this be a hardware problem?
 
I'd say its an alignment problem rather than a hardware fault. Which satellites are you trying to pick up and how big is the dish? Have you set your USALS correctly. If you give us more information we can help you further.

Regards

Liam
 
i have a 1.9mtr dish fixed, at sly 28deg, have tried other boxes off the same dish and all is fine, have tried the tm600 on a mates dish (which is fine with his tm600) but still unable to scan in most of the channels.
 
Back
Top