1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LG KP500 COOKIE Unlocking Tool 2017-06-25

LG KP500 COOKIE Unlocking Tool

  1. Mick
    LG KP500 COOKIE Unlocking Tool

    NOT TESTED!


    Not tested as said above please make sure you test all files!

    All instructions are inside for this LG COOKIE UNLOCK.

    THIS IS NOT A UNBLOCKER - WHICH IS ILLEGAL



    --------------------------------------------------------------------------------------


    TUTORIAL: UNLOCK YOUR LG COOKIE

    Make sure you have your LG Cookie beside you and your USB cable that it came with to connect your LG cookie to your PC. But don’t connect it just yet.
    Also make sure your LG cookie is switched off while doing STEPS A.
    Any Problems please email me. It might look like a lot to do but it’s Easy and will take 5 minutes.
    STEPS A

    Step 1: First Uninstall PC Suite if you have it installed and any LG Cookie USB drivers that you have installed.
    Now extract the folder KP500 inside this LG_COOKIE_UNLOCK.zip to somewhere on your computer.
    Step 2: Open the KP500 folder you just extracted and run USB_FLASHDRIVER_Setup.exe and install.
    Step 3: Plug your USB cable into your computer and then into your phone (which should be still switched off) Wait for it to install all the drivers and for your computer to find the phone etc.
    Step 4: Now unplug the phone and keep it switched off.
    Step 5: Run KP500-TOOL.exe inside the KP500 folder you extracted.
    Step 6: Choose option N and press enter .
    Step 7: Type \\.\USB1 (that's backslash backslash dot backslash USB1) (no spaces) and press enter
    Step 8: Now type KP500.flb and press enter
    Step 9: Now type STATIC_EEP (get ready to connect your phone to your pc)
    Press Enter then within 1-2 seconds, connect the phone to your PC(still switched off) (timing is critical!)
    Step 10: If successful, 2 new files called STATIC_EEP and STATIC_EEP.big will appear in the KP500 folder.
    You want to keep the smallest sized one STATIC_EEP (about 80kb) . Delete the bigger one -STATIC_EEP.big
    If these 2 files haven’t appeared – Repeat steps 5 to 9 again until you get the new files STATIC_EEP to appear.
    Step 11: Run KP500-TOOL.exe again and this time select option O and press enter.
    Step 12: Type STATIC_EEP and press enter

    Your unlock code will appear – write this down somewhere then

    CLOSE THE PROGRAM – DO NOT PRESS ANY KEY.


    Almost done. Just 2 more steps and your phone is now unlocked.


    STEPS B

    You can now unplug your phone from your PC and turn it on.
    Step 1 : Type 2945#*71001# (as if you were typing a phone number)
    Step 2: A menu appears , press Unlock Sim and then choose NETWORK LOCK.
    (If it comes up with a message saying unavailable choose SERVICE PROVIDER UNLOCK instead)
    Then simply enter your unlock code that you wrote down a few seconds ago.

    RESTART YOUR PHONE. YOUR PHONE IS NOW UNLOCKED


    ENJOY



    Thread Discussion