KNX EXAM - Question and Answers - No5 - TELEGRAMS 1

KNX EXAM - Question and Answers - No5 - TELEGRAMS

These questions and answers will help you pass the KNX BASIC EXAM



This exam study guide with questions and answers is based on the KNX EIB Telegrams sent on the bus.

There is approximately 40 questions in the area of the KNX exam.

Sample Questions:
428 KNX Telegrams
Transmission of a telegram takes maximum 40 ms. This is the case when transmitting a switching command.
FALSE

429 KNX Telegrams
The transmission of two telegrams proceeds as follows: telegram 1, pause, acknowledgement telegram 1, pause, telegram 2, pause, acknowledgement telegram 2, pause
TRUE

430 KNX Telegrams
By sending the TP Busy acknowledgement, a device is able to signal that it could not process sent data and that it would like the data to be sent again.
TRUE

431 KNX Telegrams
The transmission rate used by KNX TP is 9600 bit/s
TRUE

432 KNX Telegrams
The transmission rate used by KNX TP is 19200 bit/s
FALSE

433 KNX Telegrams
The transmission rate used by KNX TP is 19200 bit/s during commissioning, 4800 bit/s during normal operation
FALSE

All KNX Exam Links
1) KNX EXAM - Question and Answers - No1 - SYSTEM ARGUMENTS
2) KNX EXAM - Question and Answers - No2 - BUS DEVICES
3) KNX EXAM - Question and Answers - No3 - SYSTEM OVERVIEW
4) KNX EXAM - Question and Answers - No4 - INSTALLATION
5) KNX EXAM - Question and Answers - No5 - TELEGRAMS
6) KNX EXAM - Question and Answers - No6 - TOPOLOGY
7) KNX EXAM - Question and Answers - No7 - ETS
8) KNX EXAM - Question and Answers - No8 - COMMISSIONING