1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

doscam Version 0.19 For Raspberry PI 2017-06-25

doscam Version 0.19 For Raspberry PI

  1. Ferret
    oscam.conf , oscam.server and oscam.user were combined to doscam.cfg
    -> All the other config files have been renamed as follows :
    doscam.dvbapi
    doscam.srvid
    doscam.services
    doscam.tiers
    doscam.guess
    doscam.whitelist
    doscam.provid
    doscam.ac

    - Pin codes can be defined now in doscam.cfg under [ pincode ]
    -> Format: HHHHHHHHHHHHHHHH : XXXX (H = Hexserial , 8 digits and Webif under the Entitlements to read, X = 4-digit pin)
    - > Example of map with Hexserial 0000AABBCCDD0000 and Pin 1234 :
    [ pincode ]
    0000AABBCCDD0000 1234

    - AES keys can be defined now in doscam.cfg under [ crypto ]
    - > Format for AES Keys : A: CAID : provid : keyid : aesKey
    -> The A stands for AES. Later there will possibly be other things in [ crypto ]
    - > Example 0500:030 B00 :
    [ crypto ]
    A: 0500:030 B00 : 0D : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

    - Rate limits can be now defined as in doscam.cfg under [rate limit]
    -> Format: CAID : [ provid ]: [ srvid ]: [ chid ] : Ratelimitecm : Rate Limit Time (ms): Srvidholdtime (ms )
    -> Entries in square brackets are optional
    - > Example of 0100:00006 A for all SIDs :
    [rate limit]
    0100:00006 A ::: 4:11000 :

    - New Reader Parameters " slots " which to define it in a quad Mouse, MCR and similar devices superfluous , for each slot a reader
    -> The device must always only the first slot are specified
    - > Example of operation with a quad Mouse ( 4 slots) :
    [ reader]
    label = quad
    protocol = mouse
    device = / dev/ttyUSB0
    slots = 4
    group = 1
    - > Example of operation with a MCR8 (8 slots) :
    [ reader]
    label = MCR8
    protocol = sc8in1
    device = / dev/ttyUSB0 : 1
    slots = 8
    detect = cts
    group = 1

    - Improvements in the DVBApi for request_mode = 1
    - Improvements in the automatic recognition of internal slots
    - Bug in CCCam protocol now fixed , which could lead to freezers
    - Now fixed a few rare segfaults
    - Adjustments in the T14 protocol for Coolstream devices
    - New BISS format ( ONID sid VPID ), for example F onidsidvpid 00 XXXXXXXXXX XXXXXX
    - Gbox protocol adapted so that it remains compatible with the OSCam (long ecm support and gbox_my_password under [ gbox ] instead of [ reader] )

    Thread Discussion