City and Guilds 2357 NVQ Level 3 in Electrical Installation (bridging on from City and guilds 2365 2, and 3)
This is required to become a professional electrician.
FULL COURSE GUIDE WITH QUESTIONS AND ANSWERS, THIS COURSE GUIDE IS FROM AN ACTUAL ASSESSMENT AND COURSE.
This is the course guide for the city and guilds 2357 City and Guilds NVQ Level 3.
Following on for trainee electricians that have taken and passed the city and guilds 2365 Level 2 and the city and guilds 2365 Level 3.
This download is the full course for the 2357, it has all the parts needed and guidance to pass your exams and your onsite practical tests. As you will have a tutor come out and assess your onsite skills and workmanship before you can pass the 2357.
Unit 301. Ensure safe site working (to be covered over two separate occasions and the AM2 covers one additional occasion).
Unit 302. Diagnose and correct faults in electrotechnical systems and equipment (to be covered over two separate occasions and the AM2 covers one additional occasion).
Unit 303. Provide technical and functional information to relevant people about electrotechnical systems and equipment (to be covered over three separate occasions).
Unit 304. Maintain a safe and healthy working environment (to be covered over two separate occasions and the AM2 covers one additional occasion).
Unit 305. Prepare to install electrical wiring systems, wiring enclosures and equipment (to be covered over three separate occasions).
Unit 306. Install electrical wiring systems, wiring enclosures, and equipment (to be covered over three separate occasions).
Unit 307. Connect wiring systems and equipment using safe and approved methods (to be covered over three separate occasions).
Unit 308. Inspect, test and commission an electrical installation (to be covered over two separate occasions and the AM2 covers one additional occasion).
301 Ensure safe site working
This unit is for: You if you work on electrotechnical systems and equipment as you will need to ensure that where you work on site is continually safe for electrotechnical working.
This unit is about: Assessing the site for hazards prior to, during and on completion of work on electrotechnical systems and equipment.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• assess the working environment at the site for health and safety purposes
• plan and agree a safe system of work
• carry out safe working practices including the correct use of access equipment
• monitor that the site remains continually safe during working and is left in a safe and secure condition on completion
*AM2 counts as one of the three occasions for this unit.
302 Diagnose and correct faults in electrotechnical systems and equipment
This unit is for: You if you diagnose and correct faults in electrotechnical systems and equipment, and need to take appropriate action.
This unit is about: Ensuring the safe identification of faults, and correcting the faults by using safe and approved methods
This is what you need to show: You need to show that you possess the skills and knowledge to:
• follow correct procedures in identifying the location of the fault
• carry out safe and secure isolation procedures
• diagnose the faults in the electrotechnical systems and equipment
• correct faults using safe and approved methods
• use test equipment and tools correctly
*AM2 counts as one of the three occasions for this unit.
303 Provide technical and functional information to relevant people about electrotechnical systems and equipment
This unit is for: You if you pass on technical or functional information relating to electrotechnical systems and equipment on which you have been working.
This unit is about: Supplying technical and functional information accurately on appropriate occasions or at handover with the right amount of detail bearing in mind the level of awareness of the recipient of the information.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• identify who should receive such information and at what level of detail
• supply the information that is within your job capabilities and responsibilities
• pass on the necessary safety considerations in the correct manner
304 Maintain a healthy and safe working environment
This unit is for you: … whilst at work. The Health and Safety at Work Act, 1974, seeks to secure the health, safety and welfare of people whilst they work and protect other people against risks of health or safety arising from the activity of people at work.
This is unit is about: Maintaining a health and safe working environment
This is what you need to show: You need to show that you possess the skills and knowledge to:
• ensure that your own actions do not create any health and safety risks
• not ignore hazards with significant risk in your workplace
• take sensible action to put things right
*AM2 counts as one of the three occasions for this unit.
309 Prepare to maintain electrical systems and equipment
This unit is for: You if you prepare to maintain electrotechnical systems and equipment
This unit is about: Confirming that your work, tools, plant and materials meet requirements and that the working conditions are safe for work to commence.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• carry out an assessment of risk and plan a safe system of work
• identify any changes in the working conditions which might impact on the maintenance work,
• co-ordinate the maintenance work with the work of other people who might be affected by your own work,
• ensure that the tools, instruments and equipment are safe and fit for purpose
310 Maintain electrical systems and equipment
This unit is for: You if you maintain electrotechnical systems and equipment
This unit is about: Following agreed procedures when carrying out maintenance activities on electrotechnical systems and equipment.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• maintain electrotechnical systems and equipment in accordance with a safe system of work,
• identify faults accurately and safely,
• carry out repair activities within the scope of your job responsibilities,
• record your findings in accordance with organisational requirements.
311 Inspect, test and commission maintained electrotechnical systems and equipment
This unit is for: You if you inspect, test and commission maintained electrotechnical systems and equipment.
This unit is about: Carrying out the process of inspection, testing and commissioning in a safe manner and in the correct sequence to comply with the latest Industry Standards and regulations.
This is what you need to show: You need to possess the skills and knowledge to:
• inspect, test and commission the maintained electrotechincal systems and equipment in accordance with approved procedures.
• select and use the appropriate testing equipment
• carry out an accurate handover of the maintained electrotechnical systems and equipment.
• keep good records of the procedures and results.
*AM2 counts as one of the three occasions for this unit.
399 Electrotechnical occupational competence (AM2 Assessment)
This unit is about: This unit is designed to enable learners to demonstrate ‘Electrotechnical occupational competence’ in accordance with approved industry practices and the current statutory and non-statutory regulations:
1000's of questions for the AM2 and the 2357 can be found here:
160 AM2 City and Guilds 2357 Questions and Answers
AM2 City and Guilds 2357 Ultimate Study Guide and Questions and Answers for trainee electricians JIB
City and Guilds 2357 - AM2 Course Guide
LINKS BELOW ARE FOR OUR OTHER CITY AND GUILDS COURSE WORK, EXAMS, QUESTIONS AND ANSWERS:
If you are starting out you should look at our Level 2 City and Guilds course guides with exams.
UNIT 201 CIty and Guilds 2365 201 501 Exam Past Paper - Health and Safety Question and Answers Level 2 & 3
UNIT 202 City and Guilds 2365 Unit 202 Principles of Electrical Science Exam Past Paper Questions and Answers
UNIT 203 City and Guilds 2365 Unit 203 Electrical Installations Technology Questions and Answers Mock
UNIT 204 City and Guilds 2365 Unit 204 Installation of wiring systems and enclosures Questions and Answers
UNIT 210 City and Guilds 2365 Unit 210 Exam Questions and Answers Mock Past Papers
I will also be uploading today the City and Guilds Level 3 Course (2365 Lvl3)
This is required to become a professional electrician.
FULL COURSE GUIDE WITH QUESTIONS AND ANSWERS, THIS COURSE GUIDE IS FROM AN ACTUAL ASSESSMENT AND COURSE.
This is the course guide for the city and guilds 2357 City and Guilds NVQ Level 3.
Following on for trainee electricians that have taken and passed the city and guilds 2365 Level 2 and the city and guilds 2365 Level 3.
This download is the full course for the 2357, it has all the parts needed and guidance to pass your exams and your onsite practical tests. As you will have a tutor come out and assess your onsite skills and workmanship before you can pass the 2357.
Unit 301. Ensure safe site working (to be covered over two separate occasions and the AM2 covers one additional occasion).
Unit 302. Diagnose and correct faults in electrotechnical systems and equipment (to be covered over two separate occasions and the AM2 covers one additional occasion).
Unit 303. Provide technical and functional information to relevant people about electrotechnical systems and equipment (to be covered over three separate occasions).
Unit 304. Maintain a safe and healthy working environment (to be covered over two separate occasions and the AM2 covers one additional occasion).
Unit 305. Prepare to install electrical wiring systems, wiring enclosures and equipment (to be covered over three separate occasions).
Unit 306. Install electrical wiring systems, wiring enclosures, and equipment (to be covered over three separate occasions).
Unit 307. Connect wiring systems and equipment using safe and approved methods (to be covered over three separate occasions).
Unit 308. Inspect, test and commission an electrical installation (to be covered over two separate occasions and the AM2 covers one additional occasion).
301 Ensure safe site working
This unit is for: You if you work on electrotechnical systems and equipment as you will need to ensure that where you work on site is continually safe for electrotechnical working.
This unit is about: Assessing the site for hazards prior to, during and on completion of work on electrotechnical systems and equipment.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• assess the working environment at the site for health and safety purposes
• plan and agree a safe system of work
• carry out safe working practices including the correct use of access equipment
• monitor that the site remains continually safe during working and is left in a safe and secure condition on completion
*AM2 counts as one of the three occasions for this unit.
302 Diagnose and correct faults in electrotechnical systems and equipment
This unit is for: You if you diagnose and correct faults in electrotechnical systems and equipment, and need to take appropriate action.
This unit is about: Ensuring the safe identification of faults, and correcting the faults by using safe and approved methods
This is what you need to show: You need to show that you possess the skills and knowledge to:
• follow correct procedures in identifying the location of the fault
• carry out safe and secure isolation procedures
• diagnose the faults in the electrotechnical systems and equipment
• correct faults using safe and approved methods
• use test equipment and tools correctly
*AM2 counts as one of the three occasions for this unit.
303 Provide technical and functional information to relevant people about electrotechnical systems and equipment
This unit is for: You if you pass on technical or functional information relating to electrotechnical systems and equipment on which you have been working.
This unit is about: Supplying technical and functional information accurately on appropriate occasions or at handover with the right amount of detail bearing in mind the level of awareness of the recipient of the information.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• identify who should receive such information and at what level of detail
• supply the information that is within your job capabilities and responsibilities
• pass on the necessary safety considerations in the correct manner
304 Maintain a healthy and safe working environment
This unit is for you: … whilst at work. The Health and Safety at Work Act, 1974, seeks to secure the health, safety and welfare of people whilst they work and protect other people against risks of health or safety arising from the activity of people at work.
This is unit is about: Maintaining a health and safe working environment
This is what you need to show: You need to show that you possess the skills and knowledge to:
• ensure that your own actions do not create any health and safety risks
• not ignore hazards with significant risk in your workplace
• take sensible action to put things right
*AM2 counts as one of the three occasions for this unit.
309 Prepare to maintain electrical systems and equipment
This unit is for: You if you prepare to maintain electrotechnical systems and equipment
This unit is about: Confirming that your work, tools, plant and materials meet requirements and that the working conditions are safe for work to commence.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• carry out an assessment of risk and plan a safe system of work
• identify any changes in the working conditions which might impact on the maintenance work,
• co-ordinate the maintenance work with the work of other people who might be affected by your own work,
• ensure that the tools, instruments and equipment are safe and fit for purpose
310 Maintain electrical systems and equipment
This unit is for: You if you maintain electrotechnical systems and equipment
This unit is about: Following agreed procedures when carrying out maintenance activities on electrotechnical systems and equipment.
This is what you need to show: You need to show that you possess the skills and knowledge to:
• maintain electrotechnical systems and equipment in accordance with a safe system of work,
• identify faults accurately and safely,
• carry out repair activities within the scope of your job responsibilities,
• record your findings in accordance with organisational requirements.
311 Inspect, test and commission maintained electrotechnical systems and equipment
This unit is for: You if you inspect, test and commission maintained electrotechnical systems and equipment.
This unit is about: Carrying out the process of inspection, testing and commissioning in a safe manner and in the correct sequence to comply with the latest Industry Standards and regulations.
This is what you need to show: You need to possess the skills and knowledge to:
• inspect, test and commission the maintained electrotechincal systems and equipment in accordance with approved procedures.
• select and use the appropriate testing equipment
• carry out an accurate handover of the maintained electrotechnical systems and equipment.
• keep good records of the procedures and results.
*AM2 counts as one of the three occasions for this unit.
399 Electrotechnical occupational competence (AM2 Assessment)
This unit is about: This unit is designed to enable learners to demonstrate ‘Electrotechnical occupational competence’ in accordance with approved industry practices and the current statutory and non-statutory regulations:
1000's of questions for the AM2 and the 2357 can be found here:
160 AM2 City and Guilds 2357 Questions and Answers
AM2 City and Guilds 2357 Ultimate Study Guide and Questions and Answers for trainee electricians JIB
City and Guilds 2357 - AM2 Course Guide
LINKS BELOW ARE FOR OUR OTHER CITY AND GUILDS COURSE WORK, EXAMS, QUESTIONS AND ANSWERS:
If you are starting out you should look at our Level 2 City and Guilds course guides with exams.
UNIT 201 CIty and Guilds 2365 201 501 Exam Past Paper - Health and Safety Question and Answers Level 2 & 3
UNIT 202 City and Guilds 2365 Unit 202 Principles of Electrical Science Exam Past Paper Questions and Answers
UNIT 203 City and Guilds 2365 Unit 203 Electrical Installations Technology Questions and Answers Mock
UNIT 204 City and Guilds 2365 Unit 204 Installation of wiring systems and enclosures Questions and Answers
UNIT 210 City and Guilds 2365 Unit 210 Exam Questions and Answers Mock Past Papers
I will also be uploading today the City and Guilds Level 3 Course (2365 Lvl3)
