Need help for Jtag

I need help. I have Cloud Ibox 2 Plus. It was bricked a year ago. I'm tryign to find Cypress EZ-USB FX2LP CY7C68013A USB2.0 Development Board Aliexpress and ordered a few times but each seller send me dual jumper version. I'm living in Turkey so I can't order from ebay because our government ban paypal Is there any other solution for this situation. I'm trying to jtag with dual jumper version Cypress board it detects mobo of Cloud Ibox 2 plus but warns I/O error each time

What is the difference between dual jumper version and single jumper version. Both versions are using same chip. Please help me for this situation.

when I'm trying despretly I clicked Memory and SDS link from Broadband Studio and after Flash Explorer there's write "the board strapped for little endian mode" and I/O error text dissappear. I chose cloudboot.bin and flash progress was start. Firstly it deleted flash quickly and downloading flash takes long time but finish succesfully. Closed Cloud Ibox 2 Plus and remove wires and power on again but there's nothing When flashing process leds show "boot" text. When power off and power on again not blinks leds attached usb for installing image but there's no response

Attached HDMI cable duration of this process and nothing happen.

If the box is saying Boot the the bootloader is now fine youll now need to upgrade it to the jcfe.05 version bootloader via usb then flash a image.

Ferret said:

If the box is saying Boot the the bootloader is now fine youll now need to upgrade it to the jfe.05 version bootloader via usb then flash a image.

Click to expand...

But there's no text boot again after flashing process. And if everything is ok how can I upgrade jfe.05 verison bootloader.

Use bb3 to flash the normal booloader again.
Power off
Put the J-CFE-0.5 bootloader on the usb stick flash it as an image would be flashed
Now Power down and flash the image.

1 - Flashed bootlader. - OK
2 - Power off. - OK
3 - where can I find "J-CFE-0.5 bootloader"?

Its included in this download image is old i wouldnt use it but the bootloader is in the download

DW BackUP Vix Hades 0.11 Cloud Ibox 3 & 2+

Here's the situation at the moment.

Its getting to a boot screen so there is nothing wrong with the bootloader or it would not get that far.

1 - Flashed bootlader. - OK
2 - Power off. - OK
3 - Remove jumpers from Cypress Board - OK
3 - put J-CFE-0.5 bootloader in USB Stick - OK
4 - The problem starts here. Attached USB Flash Disk and Power On Cloud Ibox but there's nothing happen. There's no text and light display panel and there's no boot logo (video signal)

What folder setup have you put the cfe 05 in

I can't flash. Just flashed cloudboot with bb3. There's no reaction to usb flash disk.

The iboxes are really old now,Why not just get a zgemma

lescantle said:

The iboxes are really old now,Why not just get a zgemma

Click to expand...

It's enough for me. I don't need additional features. And the most important thing it stays useless and wanna use it.

Ferret said:

What folder setup have you put the cfe 05 in

Click to expand...

Created 2 folders with names xpeedlx and cloudix and put same files under them.

Is there any other way to install image.
Can I install image with bb3?
Can I install image from RS232 port?

mirturk said:

Is there any other way to install image.
Can I install image with bb3?
Can I install image from RS232 port?

Click to expand...

No there no other way to flash it.

Try another usb stick and format it to fat 32 with the hp format tool and try flash the 05 bootloader with both xspeed and cloudis folder structures the rar file need unzipping before putting in that folder.

Make sure you try flash with the side and rear usb ports.

Ferret said:

No there no other way to flash it.

Try another usb stick and format it to fat 32 with the hp format tool and try flash the 05 bootloader with both xspeed and cloudis folder structures the rar file need unzipping before putting in that folder.

Make sure you try flash with the side and rear usb ports.

Click to expand...

Tried these ways but the problem is there's no display text when I power on cloud ibox. And normally my usb stick has built in led and flashes when reading and writing proccess and when I power on cloud ibox there's no reaction both side usb ports.

It does not alwaya show a display with the recovery bootloader you judge if it is working via the USB activity light. Yours does not flash so use a file in the bootloader folder called force youll find that in the image of mine you downloaded.

Thanks a million ferret. Finally succeeded. I hope I will finish all settings today.