help

Might be worth saying what you have setup emu wise on the box. And have you edited the cfg for the emu with your line.
 
thanks for your reply, im new to this sort of stuff so i dont have a clue. i bought the s6000hd and it was working, it then crashed and was blank so i followed your instructions and that you put on here and put this on it with my usb stick openpli14. the tsmedia and everything is working fine and i worked out how to do the channel search, they all show up but only normal channels work, not the sky channels
 
thanks for your reply, im new to this sort of stuff so i dont have a clue. i bought the s6000hd and it was working, it then crashed and was blank so i followed your instructions and that you put on here and put this on it with my usb stick openpli14. the tsmedia and everything is working fine and i worked out how to do the channel search, they all show up but only normal channels work, not the sky channels

So its one of my backup images you loaded ?

On your remote

Menu-setup-ci\softcam

Use the <> arrows on your remote to select CCcam and then press OK.

Now with a FTP program such as DCC or Filezilla login to your box and navigate to the ect folder and locate a file called the CCcam.cfg

Enter your line in there then reboot and thats it.
 
ok so that probably sounds easy but i don know the first thing about computers, i got as far as pressing ok on the ccam and the rest is like a foreign language to me:silly: how do i log into the box lol????
 
Here is a more in depth guide on how to setup DCC on you PC and login to your box


Dreambox Control Center Setup (DCC)

1. Unrar DCC to a folder and start the program with the DCC.exe

2. First thing to do is select your Language.and enter your Dreambox password.

SelectLang.jpg


3. Now we need to select your Network configuration, most of you will have a router so this need to be selected.

SelectRotuer.jpg


4. At this point if you know your Dreambox and Router IP's enter them manually if not press the search button below the router and then the search button on the popup.

searchrouter2.jpg


5. When DCC has finished searching your router will normally be the lowest ip in a range so highlight it and press accept.

foundrouter.jpg


6. You can now repeat this to find the Dreambox IP or use the following method.

Menu-Setup-Network and check what IP you have under adpter..

You'll see your IP at the top of the page make a note of this and enter this IP in DCC under the Dreambox ICON.

Also untick the DHCP box so your Dreambox IP will never change and remain static.

7. After you have inserted the IP's click the reconnect button under the PC icon. If you have done this correctly all lines to the router and dreambox should now be green.

finished.jpg


DCC is now configured.

Ferret
 
maybe i should try a different program other than openpli14?
 
tried that one, same problem, sky channels dont work. maybe it is something i am doing wrong in the set up?
 
What image you using now is it still openpli

Sent from my GT-I9195 using Tapatalk
 
Openatv when have you installed a cam from cam menu your line will go in usr/keys

Sent from my GT-I9195 using Tapatalk
 
Think your been confused here swapping image nothing wrong with the first one you flashed.

But since you have usr/keys as bobby states is where you edit the config, make sure you have turned CCcam on and once thats done if it is still not working it who your connected to that is at fault.
 
sorry im a pain, but i have put openpli4 back on as i found it easier to use. but when i do tuner configuration on automatic it finds satelite 28.2E but it says locked, is this why the sky channels dont work?
 
Back
Top