Openbox x3 no H polarity signal

bitterdog

Inactive User
Joined
Feb 17, 2013
Messages
6
Reaction score
1
Ive switched ports on the LNB I know the LNB is fine when i hook up my captiveworks up the transponders all give signal. On my captiveworks i have a setting for OSC-DP but nothing like this on the X3.
im ripping my hair out with this box, I see why they are so cheap!

Any suggestions on how i can get the H transponders to come to life? I MISS DUCK DYNASTY!

thank you
 
I believe that the openbox's have a higher voltage and that causes a problem with sly lnb's and if you have a sly lnb that could be where the problem is. The solution was to put a capacitor (I don't know what value) in line with the cable or ready made kit was available from ebay another is to replace lnb with non sly lnb.
 
get a dishnetwork legacy lnb instead of the dishpro,they handled H polarities different than a normal lnb.
dishpro H freqs are 13xxx instead of 12xxx
 
that doesn't solve the H polarity issue.
The receivers just don't support that lnb.
 
Any non sky lnb will do because lnb's for sky are made to operate under lower voltage that is why a voltage dropped across a capacitor fixes the problem.
 
Back
Top