Openbox X5

Hi Guys

any feedback good or bad ?? New box so limited support. Nice GUI and decent remote. Heard there are issues with CCcam.

Thoughts

thanks in advance

Hi there

I have just purchased one today and i am having major problems putting my clines on and still. Can you give me any advise please

if you kill it,no way to recover like with the old receivers.
You know people are going to try to load channel lists off the net.
One of the leading causes of receiver killings if the old receivers were any indication.

I cannot load the lines on by usb, on the old the have numbers 01,02 all the way to 14, this doesnt can u give direction on how to load using usb please it would be greatly appreciated

Thanks
Reeceyd

Are your c-lines cfg file? if yes go to menu, system setup,ccam client setup, press ok, then update by usb, press ok, then load the ccam cfg file by pressing the red load button at the bottom of the screen.

hope this helped you.

Sorry forgot that after you go to system setup, press access control. then as above.

Hi there thank you for that, i have done that it accepted the file however still wont connect i really appreciated your help though thank you

reeceyd

has anyone got this to work yet pls ive got one here and cant make head nore tail of it
so do u press the usb buton on the remolt help pls asap chears tony

If using latest sw
Hers info from sataid

Now click Menu -> System Setup

When you see the System Setup screen displayed, Press 2 7 7 8 on your remote control


and then the Access Control Option will become available [as shown below]
Click on Access Control

If you Press 2 7 7 8 on your remote control once again, the Access Control will be hidden from sight

now click on CCcam Client Setup


Now click Update Files By Usb


Now select Option 1 CCcam.cfg and click the Red button to load the clines.

Remember to set Load Balance to OFF when running multiple clines.


Once you see CCcam.cfg Load Data OK click the Exit button


Now the clines have been uploaded, we need to activate them.

Click CCcam.cfg Edit


Now you must enter the Password, the default Password is 0 0 0 0

Click CCcam Edit


As you can see all clines are Off-Line and inactive


Highlight / Select each line one by one and click the OK button
this will indicate which line you wish to use, and place a check mark / tick next to the line.


Once you have placed a Tick next to all your lines click the Exit button


You can if you wish chech the status of your lines by going back into the previous Menu you just left.
And once a connection has been established, your clines will then become active, as shown below.

And that's it, you can now exit all Menus.

Now to check all is okay, select a channel your cline will open


May haqve to reboot after making lines active not sure.

If older sw use this method

Note:
If you are running multiple clines set Load Balance to OFF.
Menu -> System Setup -> Access Control -> CCcam Client Setup -> CCcam.cfg Edit and set Load Balance to OFF


The first thing you need to do is add your clines to CCcam.cfg file, and save the file to a USB Stick
Now place the USB Stick [with the CCcam.cfg file] into the USB port on the front of the receiver.
All you have to do now is follow the instructions below.Click Menu -> System Setup


Now click Access Control

Now click CCcam Client Setup

Now click Update Files By USB

Now select Option 1 CCcam.cfg and click the Red button to load the clines.
There is space for upto 32 clines, I have in fact seen 14 clines online at the same time without any issues.

Remember to set Load Balance to OFF when running multiple clines.

Once you see CCcam.cfg Load Data OK click the Exit button

Now the clines have been uploaded, we need to activate them.

Click CCcam.cfg Edit

Now you must enter the Password, the default Password is 0 0 0 0

Click CCcam Edit

As you can see all clines are Off-Line and inactive

Highlight / Select each line one by one and click the OK button
this will indicate which line you wish to use, and place a check mark / tick next to the line.

Now click the Blue button to Connect
You will then see the message Connects to Server Please Wait

Once a connection has been established, your clines will then become active

ou can now Exit all menus.

And that's it, you now know how to add clines, and also how to activate them.

thanks for that manic ive emailed it to my m8 will let you no when he gets back to me cheers tony

ps he's hoping to have it working for the diner time 12.45 kickoff common u reds

just one thing with he's s10 he could never get it to work from the usb can it be type in like the s10

Yes, and I have used usb ok on s10.

my m8 says to say thank you he's got it up and running now just has to mess with channel edit to sort he's favs out