OpenPli Box - how do I add additional sattelites

shabbaranks · May 5, 2015

Hi,

So I thought I would be clever and get a box to mess with, its a modified nbox bzzb which came with an OpenPli image on. Working my way around I notice it only has 2 satellites 11.2 and another - is there a config file which holds the sat info as Im trying to add 28.2....

Im guessing Enimga2 is pretty much standard across the board - is it a driver based OS? Say for example if an addon is supported by E2 should it work on all E2 boxes?

Thanks

cat010 · May 5, 2015

go to menu plugins press green button and it will download more plugins then settings and pick a channel list for your requirements let it install reboot box and you should be good to go

shabbaranks · May 6, 2015

Thanks but is it a plugins issue? The only transponders (is that the right word) I can see are 11 something or other and another on my other boxes I have a whole list of different options available one being 28.2.

Thanks

Ferret · May 6, 2015

Just make up a satellite.xml on here with the positions you need and ftp it in.

http://satellites-xml.eu

shabbaranks · May 6, 2015

Ferret said:
Just make up a satellite.xml on here with the positions you need and ftp it in.

satellites.xml generator / transponder .ini generator

Genius, thanks.... Is it obvious which location to upload it to on the box?

Ferret · May 6, 2015

shabbaranks said:
Genius, thanks.... Is it obvious which location to upload it to on the box?

/etc/tuxbox/

shabbaranks · May 6, 2015

Ferret said:
Just make up a satellite.xml on here with the positions you need and ftp it in.

http://satellites-xml.eu

Genius, thanks.... Is it obvious which location to upload it to on the box?

shabbaranks · May 7, 2015

Ferret said:
/etc/tuxbox/

Thanks managed to get it going although for some strange reason it liked it in /etc/Enigma2

On to the next challenge

Ferret · May 7, 2015

shabbaranks said:
Thanks managed to get it going although for some strange reason it liked it in /etc/Enigma2

On to the next challenge

As long as it worked, glad your sorted.

shabbaranks · May 11, 2015

Ferret said:
As long as it worked, glad your sorted.

Alright mate, you wouldn't know how to add and remove softcams manually would you? If I go into the softcams menu all I can do is start\restart and change which one Im using (none of which seem to work). What I wanted to do in connect to the box and clear them all out and add one which I know works...

Thanks

Ferret · May 11, 2015

shabbaranks said:
Alright mate, you wouldn't know how to add and remove softcams manually would you? If I go into the softcams menu all I can do is start\restart and change which one Im using (none of which seem to work). What I wanted to do in connect to the box and clear them all out and add one which I know works...

Thanks

On OpenPLI you can download emus

Menu-Plugin then press the green button and you have them there to download. To remove if you go into software manager then press red button i think there are removal options. Not in front of mine so i could be wrong.

shabbaranks · May 11, 2015

Thanks mate - Im not in front of mine either but, Im pretty sure if I go into this section and press the green to download its empty.

How do these images work? I mean as I understand it this is a generic image "OpenPli" so should the functionality be standard across the board or are the images modified differently per box?

Im keen to get this box working (to keep the girlfriends dad off my case) but Im also enjoying learning about them.

Although this box does seem to be more ftp manageable rather than from the GUI.

Thanks again for all your help - looking at your sig you have a bit of a collection

Ferret · May 11, 2015

shabbaranks said:
Thanks mate - Im not in front of mine either but, Im pretty sure if I go into this section and press the green to download its empty.

How do these images work? I mean as I understand it this is a generic image "OpenPli" so should the functionality be standard across the board or are the images modified differently per box?

Im keen to get this box working (to keep the girlfriends dad off my case) but Im also enjoying learning about them.

Although this box does seem to be more ftp manageable rather than from the GUI.

Thanks again for all your help - looking at your sig you have a bit of a collection

Downloads should be there, it takes a while to populate the menu with the download options but if you want to install a emu manually do this

FTP a OpenPLI specific emu to the TMP folder
Then Menu-Plugins- and find software manager
Open that and use the manual install options.

shabbaranks · May 11, 2015

How about deleting them? Ive got a whole selection of emu's which Im pretty sure don't work:-

oscam7119 sci0
oscam7119 sci0 phoenixUSB
oscam7119 sci0 sci1
oscam8648 110rc stable only readers
oscam8648 phoenixUSB only readers
oscam conax pairing

And some other random ones - I guess these are preloaded with the image?

Ferret · May 11, 2015

shabbaranks said:
How about deleting them? Ive got a whole selection of emu's which Im pretty sure don't work:-

oscam7119 sci0
oscam7119 sci0 phoenixUSB
oscam7119 sci0 sci1
oscam8648 110rc stable only readers
oscam8648 phoenixUSB only readers
oscam conax pairing

And some other random ones - I guess these are preloaded with the image?

Let me take a look when im in front of mine mate so i can tell you the right way.

Ferret · May 11, 2015

If you carnt wait mate you could ftp in and remove manually

/etc/init.d/softcam.oscam7119.

/usr/bin/oscam7119

Then reboot

shabbaranks · May 11, 2015

Ferret said:
If you carnt wait mate you could ftp in and remove manually

/etc/init.d/softcam.oscam7119.

/usr/bin/oscam7119

Then reboot

Thanks Im in no rush as Im at work and not in front of the box. Im just trying to suss out how to get the line cleared as Im certain it will its just getting the right config and the right emu as its a fussy b....d

thanks again

shabbaranks · May 14, 2015

Ferret said:
If you carnt wait mate you could ftp in and remove manually

/etc/init.d/softcam.oscam7119.

/usr/bin/oscam7119

Then reboot

Hi - finally managed to have a look at this. Neither of those locations contain the files. Usr/bin contains a load of shortcuts like bunzip2 and bzcat and the other just contains files like autofs bootclean.sh etc.

Cheers

Ferret · May 14, 2015

Just looked on mine mate usr/bin is correct

Ive 3 emus installed on openpli4 CCcam,OscamYmod and mgcamd and they all live in usr bin and /etc/init.d/

Zzip a OpenPLI mipsel for oscam and youll see the location are as above.

shabbaranks · May 14, 2015

Ferret said:
Just looked on mine mate usr/bin is correct

Ive 3 emus installed on openpli4 CCcam,OscamYmod and mgcamd and they all live in usr bin and /etc/init.d/

Zzip a OpenPLI mipsel for oscam and youll see the location are as above.

Heres whats in mine...

2015-05-14 20_41_23-bin - BZZB Box - WinSCP.png

- - - Updated - - -

There are more files but my screen aint big enough

OpenPli Box - how do I add additional sattelites

VIP Member

Inactive User

VIP Member

Administrator

VIP Member

Administrator

VIP Member

VIP Member

Administrator

VIP Member

Administrator

VIP Member

Administrator

VIP Member

Administrator

Administrator

VIP Member

VIP Member

Administrator

Attachments

VIP Member

Similar threads

We value your privacy