i've already started a topic (
https://www.digitalworldz.co.uk/linux-emus-cams-590/447587-images-dreambox-clones.html#post2638994) ,someone replyed me but now i cant access it .
back in topic i have 2 clones which i dont have the pass and i would like to reinstall the image if i can find it and a tutorial how to do it .
IT GATE TGS210
printed onboard TGS-220W REV2.0 09.09.02
NEWBDVB DVB800HD se
printed on the board HIG024 Rev: D6 11-11-22
When your able to download there is a decent sim 2 image for your 800se here
https://www.digitalworldz.co.uk/index.php?resources/4543/
Flashing guide
DM800 HD se Flashing firmware by Browser
Flashing a new firmware by Browser
What you need to flash
You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.
You need either a DHCP server and a configured bootloader
You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN.
To flash a new image, you can use the second stage loader. It must be present and not broken.
The following steps assume you have a DHCP server.
- Power down the Dreambox, either using "shutdown" and by switching off by the power switch.
Standby is not enough!
- (1.) Press and hold the power button.
- (2.) Switch on your Dreambox.
- (3.) Your Dreambox will get the next free DHCP IP address from your router.
- Now, open a browser on your PC.
(1.) enter in the address line "http://ip/" .
- (2.) on the bottom of the page, there's a link called "firmware upgrade". Click it.
- On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi" extension.
You can't flash other images (like .img)!
- Click on "FLASH!" and wait. It might take some time to upload and flash the image.
- Switch the box off again, and on again. The new image should be flashed and working.
