KryptView A 780 If You Get The easy Installation Page or have to factory reset

biffo1

Moderator
Staff member
Moderator
Joined
Dec 5, 2006
Messages
9,098
Reaction score
2,153
Location
Manchester
Didnt see a how to do guide on what if you get the easy installation page , a lot of people might already know what to do , but there will be a few new members that might not know what to do if you switch your Kryptveiw A780 on and you find the easy installation page , it happened to me and had to be talked through it [by my mate Joe]so learned how to do it and thought id share it with everyone.

1. Easy Installation Page

1-16.jpg


2. Choose Automatic search

2-17.jpg


3. Network – Choose your area, mine is Ex C&W [change by using the side arrows on your remote ,then once the area`s appear use the down button on the remote until you reach your desired network, then press ok

Hope you find it useful any questions please ask


6-14.jpg


5-13.jpg


4. Then press the green button, located bottom of the page.

8-7.jpg


5. From there you will get a list of Network ID`s, again choose the correct id for your area, mine is [59] Manchester 1. [Use either the down button on your remote or for quick scroll uses the p+/p_.

11-5.jpg


12-4.jpg


6. You will then get the TV/radio list, there are usually 48 transponders, waiting until all 48 transponders have been scanned, when finished it will say completed. press ok

13-2.jpg


15-2.jpg


7. Press Exit

10-6.jpg


8. You will then see Please wait after finished you will have a channel appear, job done all channels back up.

Also word doc attached
 
Last edited:
Am thinking of getting one of these boxes.
My cable TV and broadband come down a single cable so will have to use a splitter.
Is it best to do the initial channel scan without a splitter?

:THANKS:
 
Am thinking of getting one of these boxes.
My cable TV and broadband come down a single cable so will have to use a splitter.
Is it best to do the initial channel scan without a splitter?

:THANKS:

Some say yes but if you have a decent signal its fine with the split. Mine is split 4 ways and scans perfect.

If you use quality splitters and properly crimped cables you cant go wrong.
 
Thanks DW190
I think my efforts at cable splitting may have let me down in the past with my previous box (SV).
Are there any tuts showing how to properly crimp cables, etc and the equipment required?
 
hi mate yes there is a tool you use well just a wire cutter really and the main tool i use looks like this
IMG_0033-3.jpg

these where given to off a mate
 
get the screw on f-connectors that the sat guys use no crimping required.
 
get the screw on f-connectors that the sat guys use no crimping required.

yea all the sat guys using these , there ok for quickness and they go on the sky coax but if you use the proper cable stuff the screw end connectors i found are crap lol
 
Thanks for the answers guys,
When I put the f - connectors on do i just pare the cable down to the inner core copper wire or do I just cut back the outer casing to the braided copper wire and fold back?
 
im a newbie on here just ordered kryptview is it that easy to install and dosnt need flashing or anythink as im not aware how to do this or just wire up and of i go
 
Hi guys new to all this but been told theses boxs work in my area my question is if i purchase this box do i need to make any mods to it.


Many thanks theweeman
 
yes they work in uk need a cable signal to scan and lan for connection,box will need to be flashed with firmware from pc with cable to box
 
hi dont get into network scan should i be in factory default to start ?
 
its been so long since ive been on here i used to do the ambit modems and fun cards but im so behind, does the kryptview work without IKS?
 
update fw then you need to select provider then do a scan
dont take long tbh remember to have Ethernet cable plugged in
 
the center is solid copper in a plastic cover ( snip a bit off the end so you see the copper wire sticking out s bit)

the rest you fold back and screw the f connecter on
 
Hi guys ive tried following the above instructions and no list of network id appear on screen?help please
 
Back
Top