Workaround Fix

Rat

VIP Member
VIP Member
Joined
Aug 29, 2001
Messages
41,825
Reaction score
12,523
this solves a few problems like freezing,its always worth a try if having problems

do a factory reset

plug feed into output connection

go through the scan set up again

this should fix the problem


reason this works is,basically its a splitter,the output attenuates the signal. High signal causes the break up and freezing on certain transponders
 
this solves a few problems like freezing,its always worth a try if having problems

do a factory reset

plug feed into output connection

go through the scan set up again

this should fix the problem


reason this works is,basically its a splitter,the output attenuates the signal. High signal causes the break up and freezing on certain transponders

i think you may just of solved my problem mate, thanks very much for the infomation

jefro78
 
i had some freezing problems and lost a couple of channels , i tried what you said at the top of the thread . i had a C come up on the front of the box (thought i had broke it :proud: ) put everything back to normal and its all perfect :banana: thanks
 
press menu installation press ok password = 0000 factory default settings and press ok
 
thank you.

when you say..plug feed into output connection

do you mean the VM cable or BB?
 
Last edited:
You can try the other scart output too I was having probs so swapped both over and it seems fine now.
 
plugging feed into output connection does not bring up any netid's or channels i thought? i just tried this and wouldnt find anything on scan.

or is this an old trick that does not work anymore?
 
have you been drinking before you scanned:FRIGHT:lol,providers can change so you may not be on the one you think and that may bring up no channels found,thats an old post so unsure if still valid,nice if it still works,factory reset first then power off at rear first for 30 secs then on then try scanning from main feed.
 
Perhaps he got "post clocked"?

Responded to a post that has been deleted. Now his response seems out of place.
 
what like a "thanks" post or something else we will never know.
 
Back
Top